Evans Torque Key - Drum Key Tuner - Magnetic Drum Tuner - Drum Tuning Key with Tension Setting - Ergonomic Drum Torque Key

One tool you shouldn’t be without when changing your drum heads.

Easy to figure out, works like a charm. Good for getting your heads to a relatively uniform tension, fine-tuning by ear still needed for best results.

Comparing to the 2 other popular tuners at twice the money, this is a steal. Easy and fast to operate and right in tune.

This tool saves me time and makes it easier and quicker to tune my drums. It will NOT tune your drums for you nor is it in any way a substitute for traditional tuning. What it will do is FACILITATE your tuning efforts. First, and foremost, and this is mandatory. You MUST lubricate your lugs. I use Lug Lube but any lightweight non-graphite oil will work. If you fail to do this then this tool is of less value since any rusty or sticky lugs will have more resistance than others, defeating the purpose of the tool. Second, the tool is NOT precise. It does however get you close very quickly. It makes for a quick starting point. It's precision is much better IMO for higher tension uses than low tension ones. Hence, it does a better job on snares and smaller toms than it does bigger ones. But again, remember its purpose and limitations: it gets you quickly to a near-tuned state, from which you can now spend your time tuning. I use it in concert with a DrumDial. In summary, I like this product and use it nearly every time I tune. If used properly it saves time and pro ides convenience.

Fast and easy way to get every lug on the drum to the same torque. Depending on the trueness of the drum, hoop, and head I have had great luck with this also being nearly in-tune, making getting in-tune trivial compared to guessing at the tension by-hand before moving to the ear-checks for each lug. The numbers/measurements are a bit arbitrary though. You can't set "1.25 ft/lb of torque" for example, you just set it to "4" and whatever ft/lb that happens to be, that's what you get... but at least all lugs are at the same starting point for tuning! (Note: to get good results you still need to add tension to the head evenly, doing a star-pattern as you slowly bring up the tension. This tool just lets you bring each lug to a specific torque at the end. You can't skip the beginning though, the head material should be stretched evenly and slowly as you get it seated on the bearing edge before finally setting the tension on each lug with this tool.)

This thing is an amazing time saver if you’re a tuning perfectionist, like me. You can use it to quickly get all of your tension rods up to the same tension, and then fine tune with a TuneBot. It’s typically accurate enough to get every lug within 2-3 Hz of one another. The lowest tension settings may still be too high if you have really floppy floor tom heads, but it works great for “normal” tunings, including snare reso heads which are typically super tight. One thing to note is that the “clutch” does not fully disengage when you’ve reached the set tension. The plastic part will click out of position to let you know to stop, but you can’t just keep cranking it like you can with a torque wrench. It’s not a big deal, you just have to be careful to twist it at a reasonable speed so you don’t miss the click.

Igual que con la llave cordón tambor es lo mas, muy pero muy buen producto

Works as advertised! Fastest wat to get a drum in tune with itself.

いろいろと調べて便利そうだったから購入。 通常のチューニングキーより６～10倍近い値段がするので、 ためらっている方も多いかと思います。 結論から言うと、買ったほうがいい逸品。 ただし、普通のチューニングキーも持っておいたほうがいいです。 （最初はマニュアルでのチューニングに慣れて試行錯誤したほうがいい） 新品が届いたら、まず０から０へ一周しましょう。そこからがスタート。 あとは、自分の調整したいピッチに合わせて数字を合わせていきます。 （最も緩い状態ではチューニングができません） 目盛り５くらいでミディアム、６～８くらいがハイピッチです。 後は楽曲に合わせて、緩めるか張るかを調整していく感じです。 （この辺は使用しているスネアによって変わってきます） 目盛りを決めてクルクル回すと、あるタイミングで「カチッ」となります。 恐らく、手の勢いで”あそび”が出ると思います。細かい調整は耳を使いましょう。 もともとチューニングは自分の感覚でやっていた人には効率的で、 細かい調整のところまで機械的に持って行ってくれる感じです。 初心者より、少しかじった人向けの製品。 チューニングは中級者にとっても奥が深い世界なので、 最初は試行錯誤が必要かと思います。 製品に完ぺきさを求めるよりは、プレイヤースキルを上げること。 これはどの世界でも必須だと思います。製品自体は楽になるのでオススメ！

Excelente produto. Demora na entrega.

Awesome product. At such low cost such great product. Did the work well for me. But the product came is a very old dusted cover . But the product inside was brand new and shiny

While the bit does have a slight notch in the shaft, its purely aesthetic and won't click into a driver. If you intend to use it with a drill, you won't have an issue. But if you expect a hex shaft to fit your existing hex shaft tools, I'm afraid you'd be unpleasantly surprised.

This product is supposed to fit a standard electric screwdriver. It's the same exact shape but the size is bigger. It is thicker than the size that fits into the electric screwdriver. I have been using the DW drum key drill bit and it is great. Due to availability had to place this order. Now it doesn't even fit. Even after sanding the edges.