Loc-Line Coolant Hose Component, Acetal Copolymer, Segment, 1/2" Hose ID, 5-1/2" Length (Pack of 2),51801, Blue

Love these for coolant on my machinery. They stay put, and work great. Lots of tips and adapters to choose from. These are stiff to assemble without the tool, but it's possible.

Good to order from this vendor, they offer quality products,

Love Loc-line. I wouldn't recommend buying the knock-off brand. These hold position better and leak less if at all. Easy to use, easy to install, fits well and always decent priced.

They work well, but leak a little water though the joints.

I used these to create a shield to protect viewers watching me work on my wood lathe. I use these for a variety of purposes from cooling to blowing air and now for this shield. Strong, handy, versatile.

Good

I’m familiar with locline from CNC machines and aquariums so I recognized it immediately when looking at the extension rod and other pieces for our auxfun adult toy. I was unable to find the “Y” adapter online at a reasonable price or reasonable shipping time. So, I made my own. I used 5-minute epoxy, 1” shrink tubing, and 3XLR connectors I purchased on Amazon. The whole project was easy and relatively inexpensive. You don’t need the loc-line tool for one-time use but if you’re going to be taking things apart and putting them back together frequently I highly recommend it. It requires a fair amount of arm strength to get them together and a screwdriver to create leverage to pull them apart.

I also used this to make helping hands. A 1/4 inch loc-line connector is screwed into a drilled and tapped cutting board, the loc-line snapped on, and a small alligator clip attached to the free end. I currently have five "helping hands" coming out of the same small cutting board . The cutting board was drilled and then tapped with this 1/4 inch to 18 NPT tap . I picked the alligator clips out of this collection of alligator clips. For my initial versions, I just hot glued the clip to the smaller loc-lne nozzle. This Loc-Line assembly tool will save you endless frustration. For my use, the cheap knockoffs work pretty well too, but I haven't peel hot glue off the yet or hit them with a soldering iron.. The loc-line brand is tough quality stuff though that that I have dripped hot glue onto, have dripped solder onto, and have bumped with the hot end of a soldering iron. The loc-line stuff is still fine after the abuse. Also, the knock-off I tested is not compatible with the loc-line brand. The loc-line has bigger balls on the segment ends.

Bought for my lathe. Fits nicely and super easy to direct coolant flow.

Muy buena extension

Exactly what I was looking for. LocLine is the bees knees.

Liquide