Planet AudioAC1600.4 Anarchy Series 4 Channel Class A/B Car Amplifier - 1600 High Output, High/Low Pass Crossover, Hook up to Subwoofer for Bass

Love these amps!!! I've had them in 4 different cars over time and yes 4 different style amps. Had an issue with one but they warranted it and sent out a new one pretty quick. Perfect punch for subs and great tone for door speakers

The first unit I ordered was the 1600 and arrived DOA, which was frustrating. The unit was returned and upon return I was notified of a longer then normal wait for a replacement. I then decided to cancel the complete order and do a re-order of the 2400 Watt model since the 1600 had too long of a wait to receive. After receiving the new 2400, I went right out to check the workings. I am thankful that this unit does work and installed it roughly for the test. I still have to hide wires and mount the unit, I just hope it doesn't have any failures during the install. The power really doesn't seem to be at 2400 Watts, but I think it will be ok since I am not one to make myself go deaf from listening to it. Plus, having installed in a little 2 seater MR2 could be overkill for a unit of such wattage. I guess I am happy with the final outcome and it does work at the time of this review. Now I hope it has some years ahead to make my ears and wallet happy. Only time will tell.

For the price you can't beat it. Product was untouched, new. I feed it from a work trucks 3 12 volt batteries, so no voltage issues here. Pure copper 8 gage wire on a 100 amp circuit breaker. On one half I'm running Dayton pro audio 6.5 mids, and vifa tweeters. Both have spl of almost 93 db spl. Loud and clear. The bridged sub side I'm still refining. But it looks like I'll be running a 10 inch sub. I went easy on the ohm load. 4 ohms all around instead of 2. It runs very warm at the end of a loud 8 hour work day, good. Many tweaking features for sure. Could this product improve in any way? Only one thing I can ask is ; it has bass boost @ 45 Hz. So please add treble Boost @ about 15k or so, then we won't be looking for a add on equalizer. Btw, I run the stock deck high level outputs into a line level rca converter. This amp works well. Update after one month this amp runs too hot.

A coworker installed this amp in my 05 4 runner on 3/26/15-it is bridged at 4 ohm on a rockford fosgate pl3-210 enclosure. I had nothing but smiles on my face on the drive home yesterday! I cranked it up on the 52 freeway and got into some distortion, adjusted bass levels today after doing some research. The bass boost was just under half, i turned it all the way down but increased the input sensitivity a little bit, it sounds much better with more controlled low frequency( it sounded cleaner and i could really crank it up) The amp came with a bass remote but seemed to lack control. I had a pac brand remote i had on hand, we switched btween the supplied unit and the pac, we found the pac was much more resposive, the stock one is not being used. Overall i love having bass after not having it for 13 years. I will do more tuning and will keep this updated, im very happy with this purchase!

I purchased this to power 4 Infinity Reference speakers after completely replacing the system in my Pontiac G6. It came with the required wiring hardware (spade connectors, mounting screws, etc.) Its SNR is significantly lower than my that of my JVC head-unit. There is no noticeable static or humming with the system at low volume, where there was with the stock "premium" Monsoon system. This amp has two gain controls (two channels on each) and high and low pass filters. Since it is so powerful (1300 watts RMS), I do not need to have the gain set very high to get a lot of volume. This amp fits neatly under my rear window deck between the rear speakers and does not interfere with loading or unloading of the trunk. There is no thump when powering the amp on or off either.

Never been able to get this amp to work properly. I installed three new amps in my boat and this one has never worked to it's potential. It sounds good for a minute and then it overheats and starts to shit down. I've always had a system in my boat and wanted to upgrade and maybe this amp is just a bad one or maybe just not good at all the other two are doing thier job. One pushing two 12" subs and the other pushing four 8" tower speakers. This one was just supposed to the six inboard 6×9's.

Amp worked great for a couple of weeks paired with 4 6x9 hifonics zues series. Channel four goes in and out when it wants to and its very annoying. i have tried changing the speaker, rewired completely from amp to the door. took the head unit out to ensure all wire connections were good and had no issues. changed which speaker is connected to the fourth channel and still it always cuts off and on. Might try this brand again in the future but i will more than likely be going with a different brand to solve this issue.

First of all this is not a 1600 watt amp. At 2 ohms it's probably more like 200 watt rms. However, going into this purchase I figured this would be the case. I have it pushing 4 kicker cs series door speakers in my jeep and it sounds much better than just the 50 watt head unit. Which is all I wanted. Just please be informed this amp is really only for door speakers and you will be disappointed trying to use it with a subwoofer. Other than that it has been working fine for 2 week