MIG/MAG Gasless Welder - 120 A

The control panel of the FCAW (flux-cored arc welding) device is very user-friendly, making it easy to operate. As with many MIG/MAG welders, the wire feeder is operated using a continuously adjustable dial with which you can set the speed to between 1 and 10, according to your needs.

The flux core welder is extremely compact. All of the cables are integrated into the device and can be used immediately. The spool for the flux-cored wire is mounted inside the housing and the wire is fed to the torch from there. The wire used should have a diameter of 0.8 or 0.9 millimetres.

The housing is equipped with a handle, making the welder especially easy to carry for mobile use. Because there is no shielding gas required, you can also use the transformer-based machine outdoors, even in windy conditions. The flux welder has a powerful fan for optimally regulating the operating temperature. However, if the device does get too hot, the overheat protection ensures the required safety during operation.

Technical Details

Model S-MAG 120 FL
Rated input voltage 230 V
Input frequency 50 Hz
Wire type Cored wire (flux)
Wire feeder Internal
Wire speed 0 - 10
Diameter, wire spool 100 mm
Diameter, wire 0.8 - 0.9 mm
Max. input current 21.6 A
Max. input power 4.9 kVA
Welding current 40 - 120 A
Duty cycle 10 %
Welding current at 100 % 40 A
Welding current at 60 % 60 A
Welding current at 10 % 120 A
Power factor 0.96
Length, ground cable 2 m
Length, torch cable 1.7 m
Length, power cable 1.9 m
Cooling system Fan
Protection class IP21

Delivery Contents

Gasless welder S-MAG 120 FL
2 M5 30 mm screws
2 M5 nuts
MIG nozzle
3 MIG contact tips (0.8/0.8/0.9 mm)
Gas diffuser
Instruction manual

Stamos Germany MIG/MAG Gasless Welder Flux Core Welder FCAW Flux-Cored Arc Welding Machine Flux-Cored Wire 120A S-MAG 120 FL (230V, 50Hz, Internal Wire Feeder, Wire Diameter 0.8-0.9mm, Duty Cycle 10%)

Descripción

Preguntas comunes