TRUGLO Pro-Series Magnum Gobble-Dot All-Metal Sights

I really like these sights. They are not very big but big enough. They are very easy to find. They install super quick and feel very solid! Very happy. I'm going to got put some 1600fps slugs through the shotty and see if they stay on I'm 90% sure they will stay put though. They feel really good. You can get the screws nice and snug no problem. I will post update if the fall off with heavy use. If no update they stayed on and I'm stoked.

Ok I have a new browning A5 12ga. I will tell you that online the spec sheet says it has a 1/4” rib that is not true. It’s to big on the rail. I bought the 6mm and it fits nice and snug. It’s nice it’s fully adjustable as well. Definitely worth the money.

I only gave 4 stars because the adjustment screw on the rear sight is a little weak. While tightening it down I actually broke the screw head off and the sight was still loose and had movement before breaking. I since have replaced the screw and it is holding up great

Browning BPS 12 ga, the TG944D fits the rib perfectly. Tight enough on the rear sight to not need to be fastened. Front fits snug but a bit easier to put on. Sights came aligned level right out of the package so if turkey hunting no adjustment needed. I held 6 o'clock and the pattern was mostly above at 27 yards, so aim at the wattles and you are good. Snapped the sights onto the gun, snugged them down a bit, two shots with Long Beard XR 12 ga #5 at 27 yards - right on the money, no adjustment needed. Clear, bright beads, accurate, adjustable, durable. Can't ask for more than that.

I needed these sights for my shotgun . I still need sights for my shotgun because i only recieved the front sight and 3 out of the 4 allen screws were already stripped. Be carefull ordering these sights you might only get the rear sight that i didnt recieve. Its out there somewhere. I guess i will mount the front sight and improvise just like we did in the 1970's. Hopefully this front sight will at least give me a 50/50 shot of hittin something.

Perfect fit on a Stoeger pump gun with 6mm rib. A tad snug but some light encouragement with a rubber mallet seated them perfectly to the point I would venture to guess they would stay in place without the set screws. I agree with others who stated the fibers seem a bit small but that's not necessarily a con IMO. I replaced the front red fiber with a green one to match the rear (these old eyes have trouble with red) and now have a clear and bright full sight picture. The green gathers and projects a much sharper and clearly defined dot. Set screws are somewhat small and I could easily see getting too heavy with torquing them down and stripping or breaking them. I put just a touch of blue loctite on them, snugged them up and then gave them an additional light bump. Threadlocker will somewhat lube them allowing ease of installation versus dry threads so don't get too heavy handed with the included hex key. I don't foresee any issue's and these should do fine for turkey season.

It is a nice sight, but one problem I have with it is that the rear sight left & right windage screw will not tighten upthat is due to the supplied allen wrench does not fit the allen hole and hole seems to be rounded out. I cannot find an allen wrench to fit it metric or sae or other wise

This is the third set I have bought. All three were installed on 870 model shotguns including an 870 Supermagnum 12 gauge, and 870 Magnum 20 gauge and an 870 20 gauge Compact model. I have had zero fitting issues. On my 870 Magnum 20 it required a pretty big windage adjustment to get it centered but it did get centered. All three guns were built for turkey hunting and all three have stopped them in there tracks. Keep in mind... If you're going from a bead sight to these naturally your shot will drop. Be prepared to do some work with your shotgun if your patterns are fairly tight out to 40 yards. The fiber optics capture a lot of light and work fairly well in low light situations. I have had a few fibers break, but they come replacements which are easy to install. You cannot go wrong with this sight. Proofs in the pudding!