🔌 Connect with Confidence!
The zdyCGTime USB 2.0 A Screw Terminal Block Connector Cable is a versatile and user-friendly solution for extending USB connections. With a length of 30CM and a 5-pin screw terminal design, this cable allows for easy data transmission and charging without the need for soldering. Ideal for various USB interface devices, it comes in a convenient 2-pack, making it perfect for DIY enthusiasts and professionals alike.
A**R
So far so good, nice to not have to solder wires into a salvaged USB port.
The connector with the screws is removable and a common connector type but unfortunately I don't know the name of that connector type. No complaints.
C**H
Works great, at least for power
Worked for what I needed. I haven't tried to use this for a data signal. I only needed to get the 5 volt power out of a USB port for a specific project.
G**E
Great to power up and test your electronics
Perfect to power up and test electronics projects.I plugged the USB into a power bank and it supplied the 5VDC that I needed
G**O
Pin 4 not wired out!
The only reason I bought this product is to get ALL 5 PINS of the micro USB wired out. Instead of breaking out pin 4, the block breaks out a shield wire. The least the seller could do is include a pin-out diagram so people know what they're buying!
J**P
Seems OK but Poor documentation...
There was no pinout document and the markings are illegible/missing.My eyes are old, but should be able to see something while zooming in with phone.FOUND ATTACHED PHOTO ON COMPETITOR SITE. HAVEN'T VALIDATED DATA PINS ARE RIGHT, BUT POWER & SHIELD PINS APPEAR TO BE THE SAME. HOPE THIS HELPS
M**C
Great product for USB terminal block pinout solution!
Does the job as intended. Well built solid terminals allow for clean connection.
J**S
Perfect for wiring Nest Outdoor Cams through a wall.
It seizes to amaze me what wonderful yet niche products that you can find on Amazon. I purchased these specifically to solve a problem I have with Nest Outdoor Cameras. The brilliant minds at Nest designed a bulky fixed USB connector that requires a whopping 3/4" hole to be drilled through your wall if you wish to have the USB wire hidden inside your house. As drilling a hole of that size through brick wall is not an option for me (realistically, anyone for that matter), I opted to cut the USB wire and feed it through a much smaller hole (5/16"). However, I needed a way to reconnect the USB wire neatly inside.CGTime to the rescue! I looked around frantically to see if there was any better way than resoldering the leads (a skill that I'm severing lacking) and this product fit the bill 110%. The package includes a small flat screwdriver, and USB terminal block and a 1 feet terminal block to USB cable. The USB terminal block is clearly labelled for easy wiring (S: shield wire, +: red wire, D+: green wire, D-: white wire, -: black wire). I especially appreciate the 1 feet cable, since I could cut 1 feet from the original and still retain the same length. I chose to cut 1 feet from the original USB cord because my backup plan was to resolder the cable in case this product did not work out. Alas it did and it did beautifully! Crisis averted. I should mention that some of the wires are quite tiny, and you may want to consider purchasing a good wire stripper that can strip fine 28awg wires.In the end, it all worked out. I have a small hole from the outside to the inside. My USB cable is hidden neatly within the building. And thus far, the terminal block connection has been working beautifully and provides a solid power connection to my outdoor camera.
Trustpilot
Hace 3 días
Hace 2 semanas