TotalBoatTable Top Epoxy Resin Kit - 2 Quart Crystal Clear Epoxy with High Gloss & Self-Leveling Finish - Easy 1:1 Ratio for Bar and Table Coating, Woodworking, Molds, and Resin Art Casting

The TotalBoat Table Top Epoxy Resin 2 Quart Kit offers a crystal-clear finish that beautifully enhances the appearance of bar tops, table tops, and various craft projects. It’s easy to mix and apply, resulting in a durable, high-gloss surface that’s both protective and visually appealing. However, it requires careful attention to mixing and curing instructions to avoid bubbles and imperfections.

I used this resin and some resin art, and I made table, cup holders, and river table. I had to order more but this product worked great for my projects.

I bought this in a pinch when the normal brand I used was unavailable in the time frame in which I needed it. It worked ok but it does not flow and level nearly nicely as some other products. My first pour I wound up scraping half the product off and using as a "seal coat" because it simply wouldn't flow. (This was a non porous surface poured at an ambient temperature of 70 F mixed per manufacturers instructions). When I poured the flood coat I mixed up twice as much as I needed, pre heated both parts of the epoxy in a hot water bath, and even with all that, it was still a pain to get it to flow. The product is nice once it is set, but requires more prep work and attention during the pour than other products.

This is the best epoxy I have tried. I need to buy some more . Nothing compares. Looks great, no bubbles.

I got very good results with this top quality product. The instructions were very clear and included tips on what to expect after a pour, and what to do if there's a problem. Ambient temperatures are critical to success. My initial scratch coat took a little longer to set up because the temperature was around 65 degrees. After letting the project sit overnight, it was nearly dry the next morning. The 2nd pour was much faster. Total Boat has become the preeminent supplier of resin products and is a favorite of cabinet makers like me. I plan to use this on future work when appropriate. This little project was a test of the product for my granddaughter. She loved it.

This stuff is great! Already bought it a second time. Works for just about everything. If used it on signs, coasters,and tables. Does produce alot of bubbles while mixing, but if you seal project in modge podge before you apply the resin it helps from creating more bubbles from rising to the surface. I also use a torch a few times during the process to get rid of them. It's easy to use and hardens quickly if measured out right. It seems to work great for thicker applications as well. Just take your time and do it right. I have no complaints! Definitely worth the money for as far as it goes!

The media could not be loaded. We used this resin to cast a few different things. I've included a couple of them. The resin cures faster than I expected. It also has taken every pigment that we've used very well. I would highly suggest the use of a pressure pot with this resin when using it for anything other than flat pours. We got some very small bubbles in a couple castings that we were unable to get out using other methods. The bubbles were small enough that they wouldn't be noticed unless you were looking for them. Pumps are also suggested. The part A can be thick and when trying to get an exact measurement, it's easy to pour more than you need. Fortunately we have molds to pour the extra into so it's not wasted. But not everyone has that option. Not the best resin that we've used. But for the price, we would order it again.

I tried four different brands and this one came out the best, with the least amount of flaws. Use your heat gun and be sure to follow the directions exactly.