WOBANE Under Counter Light, Dimmable LED Under Cabinet Lighting, 6 PCS LED Strip Light Bars with Remote Control for Kitchen,Shelf,Pantry,Showcase,Desk,Cupboard 6000K White, Timing, 16W 1500LM,9.8 ft

I really like these lights and I hope they last! My kitchen work area is U shaped and has no window so I need light to brighten it up. When we built the house we knew this so we did have electrical plugs placed above the cabinets for that purpose. For years we had puck lights up there and that helped but with new kits like this I wanted to update and add task lighting beneath the cabinets as well. We were able to install them easily above the cabinets as well as beneath them for task lighting, although it took a bit longer than expected. I customized the length of some of the segments with 3 pin solder less connectors or by cutting them a little shorter depending on my needs. For the upper sets we drilled through the cabinets to completely hide connectors and run lights above the cabinets that are different heights as you can see in the picture. I used the U shaped connector to run a double row of lights on the deeper cabinet above the fridge to provide enough light there. These lights provide nice even light that is so much cleaner and pleasant than puck lights. When I had puck lights the light was spotty and created shadows on the ceiling from the plants and items that are set up there as decoration. For the lower sets I used the plugs inside my cabinet above the microwave and inside of the appliance garage and we drilled through the cabinets to run connector strips and completely hide all wiring and not use the visible plugs under my cabinets. I need those plugs available for other things and I did not want to see the wires from these lights all over the place. I set the light strips inside the lower lip of the cabinets shining toward the backsplash to reduce the light spot glare on the counter and it worked perfectly while still giving plenty of task light under the cabinets. I also did not want to buy the little light diffusing tracks to put these in and mess with installing those so this was the perfect solution. It all looks completely neat and clean. The remotes were easy to match to the additional receivers so one remote controls upper lights and another remote controls lower. This way I can adjust the brightness for each separately. I have them attached to smart plugs and Alexa turns them on or off with voice command but the remote is needed to change the brightness. They are very bright when needed and have a lot of flexibility to dim them to your liking. With just a little planning these were so easy to install and I love the results!

I purchased two of these kits based on the high customer satisfaction and price. Based on another reviewer's recommendations, I also purchased a package of LED cover diffuser tracks (which @ $36, cost more than than the lights themselves!). I only needed 2-1/2 tracks for my cabinets, so the other 7-1/2 tracks that came with the 10-pack will likely be discarded ($$). Oh, and the special "nano" tape used to attach the tracks firmly under the cabinets is another $7. The tracks are nice, but not really necessary. They help to make the lights slightly less intense (the "diffusion"), but the main thing the tracks do is allow you to install the lights under the cabinets more neatly, in a straight line. Would I buy that accessory again? Probably... (especially now that the price is less), but I would order fewer track pieces. The most challenging part of the project was cutting out a small wedge where some of the cabinets meet. For my project, I only had to cut out three. I think most people who purchase these lights don't bother to cut out any wedges under the cabinets, opting instead to just route their sticky lights around each wedge (there are some photos of this posted). Since I was using aluminum diffuser tracks, I needed to cut a few wedges so the track could continue in a straight line (see first two photos of the finished wedges). It wasn't that difficult using an oscillating/ vibrating saw (see third photo). Using the advice of other reviewers, I held the lights up to the cabinet before installing, to determine if I wanted to face them down toward the counter or toward the back wall. As some here mentioned, facing the lights down does result in a more noticeable reflection of the lights (in the shiny counter), so I opted to face the lights toward the back wall. There's still a subtle reflection in the counter, but it's not quite as stark. These lights are plenty bright on their max setting so no worries about them not being as bright if you opt to face them toward the wall. To hide the power cord, I just stapled the wire under the cabinet in a couple places, and hid the excess cord behind the refrigerator on one set of cabinets, and up into a gap next to the cabinet in the other set (see the 4th & 5th photos). The whole project took about two hours, including putting some colored led lights inside the liquor cabinet. No tracks used in there... just taped the colored lights along the inside perimeter, facing toward the middle of the cabinet (facing each other), so the lights wouldn't reflect as much off the mirror in the back of the cabinet. The colored cabinet lights I purchased from Amazon as well. (See last two photos of the finished project.) After the lights were all installed, I was able to quickly & easily pair one remote to both sets of the [white] undercabinet lights. Even though they are on separate walls, they now turn on & off, dim, etc., together at the same time when I use the one remote. (The colored liquor cabinet lights use a different remote with different features.) To pair (or "match") the second set of lights to the one remote, just hold the button down on the wall-mounted dimmer about 3 seconds as instructed on the manufacturers description above, then use the remote to turn it on/off. It's now "matched" to the remote.

Love these easy to install lights. After three years, the light started flickering very quickly and no matter what I did I cannot get it to stop. I was bummed thinking I was gonna have to take all of those in cabinet light strips out, but then I got the answer from AI, which was it’s not the light strips. It’s the adapter which is common to go out on LED light strips no matter the brand. I was very relieved to be able to buy a replacement adapter with this company under their accessories section and Walla. It works beautifully.

I’ve had these under cabinet led strips for over a year now, and they’ve been great! I don’t use the remote, although you have that option. Since they are energy efficient, I just got them to the warm white that I prefer and I leave them on all the time. They are a nice ambient nightlight for middle of the night trips to the kitchen. I used the included adhesive tape, which was super easy and has help up extremely well. Quality is great and I would buy these again!

No esperaba mucho por el precio, pero realmente me sorprendieron, el control funciona de maravilla y es muy fácil la instalación, solo queda ver su durabilidad, actualizare si es necesario

So I previously had these yellowish looking under cupboard lights that were dim and ... well yellow!!! Renovated our kitchen and wanted to change the lights out. Was very hesitant to purchase these as I wasn't sure they would meet my needs, so I only purchased one package. Well I was totally AMAZED on how bright they ended up being, but more importantly, how easy they were to install. Pull the tape off, connect each strip and voila!!! The lights themselves, come with a remote that you can adjust to 100%, 75%, 50%, 25% and a few other funky settings. So during the day we have them at 100% and then in the evening we drop them to 50% or evening setting. SO PLEASED with this item. And yes, I went back to purchase the second package (came in 2 days) so I could finish the look on the other side of the kitchen cupboard. Would recommend and re-order this item again and again. Only reason I scored it as a 4 star is that the package came with "U" connectors (so you can go back the other direction) but nothing for right/left angle connectors. Would recommend the COMPANY make/offer such things as cupboards are not always in a single row. Was able to curve the light bar to accommodate a gradual curve in the row.

Hasta el momento todo bien, lo instale y todo funciona correctamente, veré mas adelante si continua así y haré is comentarios.

Muy buen producto, sólo que los conectores son muy cortos

A nice enough kit to class up my original 1963 built cabinets a bit. I used and folded one of the "U" connectors to make a 90° to turn the corner, and still have bits and pieces from the kit to spare if anything fails. I'll probably never have them set higher than 50%, currently set to 40% via individual brightness up/down setting. Ran them to a smart plug to be controlled on/off via routine. Can definitely be very bright, even in daylight. Here's hoping they last!