Epoxy Floor Paint, Light Grey, 2.5 litres

I did a LOT of research on this. In the US people seem to get uber carried away with creating laboratory-grade flooring, which takes weeks. I couldn't ditch my garage contents for this amount of time. However the UK seems a slapdash opposite with some ropey looking results and I wanted something in between. Nice and solid floor finish with a shine, but not something I'd need to perform surgery on, or eat my dinner off. I was cautious about not priming first, but I needn't have been as the finish is great. No primer coat meant it could be completed a LOT quicker, too.The product itself is very easy to use, we followed the instructions to the letter and have been impressed. You get 5L of paint/colour in a larger tin and a smaller tin which is poured into and mixed in the larger one. This then gives 2 hours to use before the paint mix "goes off"I used the etching product first which cures and makes the concrete semi porous so that the paint soaks in. I was a little worried that this may make it hard to cover, but with a roller and an extender handle it was easy.The etcher was harder to use as it doesn't cover the area as well (soaks in very quickly).I used two 5L cans of paint for a large, double garage (new build) and this was ample. I did one side at a time, moving the garage "stuff" to one side, then painting the empty half and allowing to dry for 24 hrs before moving everything to the opposite side and completing the second "half". This worked well and I kept the cars out for 4 days (2 or 3 is recommended). Cars have been back in for 2 weeks now and whilst they're relatively small and don't go in and out often, there's no paint lift when I move them out. The floor looks great now and the horrific dust we had is no longer a thing.I would say this is a 2-person job. The etching process needs a pourer/sprinkler and a scrubber. As you only have two hours from mixing to the paint going off, the actually painting needs one person to edge and another to do the main roller painting (unless you're not fussed about the edges). You could do it alone if you're quick, but I wouldn't have made it! The 2 x 5L cans gave good coverage and I was able to give a second coat whilst the first was tacky/wet to give good coverage. Prepping was definitely harder than painting, but this needed no priming so was much quicker. I also vacuumed, brushed and scrubbed the vast majority of the dust out of the garage, but by nature of the concrete giving off more, there was a little residual dust which was mixed into the paint as I rollered and hasn't been an issue.All in all my perfectionist wife thinks it's a superb finish. Result!

I used this on a garage floor where the previous paint had been lifted by the car tyres. Most of the old paint was removed with a power washer and rotary wire brush, and the floor was then treated with etching fluid. Coverage has to be right when using epoxy since the paint goes off once mixed. It a rough floor with lots of pits (I filled the biggest with quick drying concrete patching mix) so I was expecting coverage to be less than stated (30m2 for 5 litres), but it was OK, the area was about 29m2 and it was fully covered on both coats. Was also impressed by the way it hides colour differences in the concrete and small blemishes, None of the underlying colour differences were visible after the first coat but it soaked into the surface in some parts and left texture differences, but these were fully covered by the second coat. I ditched the recommended roller tray on the second coat, it was easier to pour the paint on the floor and spread it with the roller. Drying took longer than stated but the weather was cool, about 13 degrees. Brushes and rollers can be washed in water. Don't yet know if it's durable or adheres well, time will tell but am chuffed with the result so far.

No mess, spreads well. Its covering is very accurate, don't waste it. Excellent finish. I used 2 x 2.5litres. Half of garage at a time. It was dry enough to put light items on the floor after 12 hours.

I have attempted to paint a few garage floors with varying degrees of success. I am so glad I finally found this product .Easy to apply , plenty of coverage ( 5L dual pack easily does 2 coats on a standard single garage).Just make sure you thoroughly prep your concrete first depending on any issues it has (sand off old loose paint, degrease or etch very shiny or new concrete)This is the paint you want for a rock hard , no lift surface.I will never use anything else in future!

Excellent product, fantastic company to deal with.This went down really well with two coats, covering an older floor that had once been painted before. After good area prep before hand, it has sealed the floor, stopped the dust and been hard wearing.Having spoken with the company, I can say they were professional, helpful and genuine, both in explaining all the details of the product and in helping the customer.Very happy with this product as an Industrial floor paint that is straight forward to use.

Bought it for my garage floor - about 26m2. It is a new, flat floor, completely clean and etched ready for the resin.It covered about 23m2 applied thinly with a roller. We ended up taking another litre of the resin (about 1kg) and 200g of hardener from the next batch in the hope that it'd cover the last 3m2.Glad I bought an extra one! Still much cheaper than offered elsewhere. You can buy a non slip aggregate as well, but not apparently from Amazon.Update: the extra bit I used from the tins did not affect setting of it or the next coat the next day. The remainder did the floor with no problems.The floor is far from glossy however, but it is waterproof. It took the full 16hrs to harden sufficiently even with a 2.5kw heater on all night to try and keep the temperate at 15'c.If I had the inclination I would have put a 3rd coat on it to try and finish the job. Had it taken less than 16hrs for the 2nd coat to dry I would have done, but ran out of time and good weather.In conclusion, the resin does what it says, it's an epoxy paint, but it needs more than two coats to look glossy.

ordered this stuff to do my garage floor. Brilliant job. Paint goes really far to as my garage was 20m2. I ordered two tins and used 1and half but that was generous portion.. easy to mix and apply and the finish looks good depending on the prep work you do. I recommend this product for any DIY job.. quick delivery to.I had mid grey but other colours are available.