🚜 Power Your Projects with Precision!
The Vevor 2 Spool Hydraulic Directional Control Valve is engineered for durability and efficiency, featuring a cast iron construction, double acting capabilities, and a high-pressure rating of 3600 PSI. Ideal for a variety of applications including tractors and loaders, this valve ensures reliable performance and ease of use.
| Material | Cast Iron |
| Brand | VEVOR |
| Item dimensions L x W x H | 5.1 x 8 x 12.2 inches |
| Exterior Finish | Iron |
| Inlet Connection Size | 0.38 Inches |
| Inlet Connection Type | British Standard Parallel Pipe Thread |
| Outlet Connection Type | British Standard Parallel Pipe Thread |
| Maximum Operating Pressure | 3.6E+3 Pound per Square Inch |
| Number of Ports | 2 |
| Outlet Connection Size | 0.38 Inches |
| Valve Type | the relief valve |
| Manufacturer | Mophorn |
| UPC | 700721076352 |
| Model | Hydraulic Valve 2 Spool 11gpm |
| Item Weight | 9.8 pounds |
| Product Dimensions | 5.1 x 8 x 12.2 inches |
| Country of Origin | China |
| Item model number | vanne de contrôle hydraulique |
| Manufacturer Part Number | Hydraulic Valve 2 Spool 11gpm |
J**A
Works great
Works great on my tractor
A**R
Works perfect.
Bought and installed on old tractor and worked perfect.
J**R
Valve body is tapped for PIPE fittings (ad does not tell you this)
My first hydraulic project although I have been farming for 20 years. Used this to replace failed control valve on '68 Massey 135 with Allied 350 loader. My original valve was tapped for O-RING fittings so when I went to install new valve the old fittings would not properly tighten. Once I figured out the problem I bought PIPE bushings and PIPE to SLIP adapters at Tractor Supply. Expected to spend an extra $60 to $80 for new bushings and fittings if your valve body is similarly tapped. Once fully installed the valve works fine. Yeah the levers are kinda close together and they do not perfectly align in neutral position but it works fine and I can now feed my cattle round bales again. The finished assembly is a bit of a Frankenstein's Monster but it works, doesn't leak and holds strong under load. Hope this helps. Good luck.
B**B
Fits Ford tractor and bucket.
It worked great on a Ford Tractor. The hose alignment with the device had to be modified to get around the tractor fender to attach to the front end bucket. The twin joysticks worked so much better than the single one that this replaced. I would recommend to the supplier to package it better due to oil leakage. Worth the money and I would recommend this product.
C**L
Failed after one Use
Failed after one use. Bley the fitting out of the Body stripping all the threads. Past the return time so stuck with this paper weight Poor quality
J**O
Ok
Good
A**L
Works perfect
There was nothing I didn't like about it I'm satisfied.
M**K
Good value
The fittings needed cost more than the shuttle valve, but valve seems to work great
Trustpilot
Hace 1 semana
Hace 1 día
