Sanus Adjustable Speaker Wall Mounts Designed for SONOS ONE, Play:1 & Play:3 - Pair (White)

Well designed, super easy install, feels solid, easy to adjust speaker. Two nits to be aware of: (1) it’s not the cleanest looking install from the back, there are a lot of knobs and bolts visible. You can’t see this at all from a typical install (eg looking at the speaker head on), but if you’re in a situation where the angle is such you’re going to be seeing the back, you may want to spring for a cleaner back design. We have this mounted on a wall in the basement that’s on the same wall as the staircase, and with how it’s angled, the first thing you see coming down the stairs is the ugly back of the speaker. Oh well, it’s a basement rumpus room. (2) of like us you find yourself with a mismatched set of surrounds due to unit failures (we have one white, one black), know that having an opposite color speaker mount if pretty noticeable. We went with white mounts because because we didn’t want to pay more to buy initial packs, and the white wire on the black speaker is not subtle. Oh well, again, it’s a basement.

The plan for everything on the S1 for wall mounting. Very easy to put together the only tricky thing is if you have to reset your speaker after it is on the wall. But that is not the fault of the mounts or brackets that's just a Sonos issue. Probably will buy some more of these. Good product! Love being able to turn them left and right and up and down

These speaker mounts are perfect for mounting Sonos Ones, or Play:1s. I mounted Play:1s in my family room up near the ceiling. Can mount the speakers right side up or upside down, depending on whether you're mounting them above or below eye level. Since mine are mounted above, I mounted them upside down, which allows access to the buttons on top. The tilt and swivel makes it really easy to position them for best sound. The mount itself is mostly plastic, but it looks and feels solid, and the mount attaches to a steel plate that is actually screwed into the wall for a good, solid, vibration free setup. I'm very happy with these - they look great and keep the speakers out of the way.

I love these speakers brackets and will help you get the sonos speakers up on the wall. The ease to install will depend on your home set-up. Internal walls with no insulation were a breeze, external walls with insulation were a bit more difficult (but that's no fault of this product). The only thing I did to mine was to modify my bracket by using a dremel to cut out a hole to pass the wire through the bracket itself. This allowed me to pass the wire through the bracket into the wall and essentially 'hide' the wire (didn't have to use a separate through-the-wall wire plate). I would love to see them actually make this change to the product.

With my sonos play:1 the bracket is hidden and overall a sleek look. BUT NOTICE that 2 screws provided to drill into the wall completely stripped. You might want to use your own fasteners, but otherwise, well made with durable metal mounting brackets and plastic covers. Decent amount of angle adjustment and can be tightened to lock in place. Would order again for the next set of speakers.

Fantastic product, overall brilliant service and produc. The shipping was fast, and all import duties and fees were prepaid.Used it to wall mount Samsung's HW-Q990F rear speakers.

I spent hours online looking at options for mounting my Samsung 9500 and even though these are not made for my speakers, they looked like they would be my best option for mounting my speakers. When they arrived, I was happy with their construction and quality and as I expected, I needed to make some minor, but easy clearance modifications for the button head hex bolts that goes through these mounts and into the back of my Samsung speakers. Since these mounts are so adjustable for aiming (up, down, right & left) where you want the speaker, I needed to make clearance in the up/down sliding path so my button head hex bolts would clear the bracket. It was fairly simple. I just put the button head speaker bolt into the mount hole and slid the bracket until the bolt hit the bracket and I used a Dremel to remove a little plastic until I was able to aim my speaker where I wanted it. All in all, it took me about 30 minutes to modify and mount the brackets and speakers. Had these mounts been made for the speakers I have, the total installation would have been even faster. I am very happy with these mounts and if I had it all to do over again, I would still be using these mounts, because they work great and look great.

Created flexibility for my Sonos one surround speakers. The screws kept both speakers nice and secure. All the instructions were clear and easy to follow, and made for a seamless installation. Money well spend, great value!

en producto cumple su funcion la de sujetar bien el sonos one genial compre cuatro. Una maravilla

J'avais peur de l'esthétique des cables de maintient mais ils ont franchement bien intégrés. Je les eu en warheouse super prix et comme neufs

Very well designed, flexible and adaptable for my older style Sonos Play 3 speakers. I have the option to mount vertically or horizontally which I didn’t know was the case for Play 3 - obviously Play 1 is way smaller and can be mounted easily. The mount is great to the speaker and actually “clips” into the holes in the back of the speaker and a screw into the back of the speaker so really solid. The “wires” that come with the kit are only for Sonos Play 1 speakers.

excelente producto, es justo lo que imagine y necesitaba

I got this wall mount for my pair of surround Sonos One SLs because it has a larger range of lateral rotation than the other ones I saw. Having just installed it, I can definitely recommend it based on the component quality and the easiness of installation. The packaging is nice, mostly recyclable cardboard and plastic. It comes with all the bits you might need including wall mount M5 screws and wall plugs that are quite beefy but I used my own wall plugs anyway. Easy to install, just two drilled holes, plugs and screw in the back plate. I'm pretty confident that these will be able to take the weight of the speaker no problem, but obviously don't try hanging anything from them. INSTALLATION NOTE: if installing these close to something above (for example under a cabinet), make sure you leave enough room above it to slide the speaker/arm onto the back plate from above. I very almost messed up by putting it too close and ended up having to attach the speaker after sliding on the arm (which is a bit finicky) rather than attaching speaker to the arm and then sliding it onto the back plate (which is the recommended order). They look nice, the wire retaining design blends in and is basically invisible. They have a good range of rotation both up/down and lateral. All in all, I would recommend these without reservation. Note: Another reviewer said that you can't reach the sync (infinity) button on the back of the speaker when mounted using this. That's not true. There is a hole in the bracket that you can press the button through. It's not easy when it's mounted obviously as it's up against the wall, but they even provide an L key to make this easier for you.