CDI 3/8 Inch Drive Adjustable Click Torque Wrench, Range 30-250 In Lbs / 4-27.7 Nm (2502MRMH)

This wrench works great. It doesn't have a very audible click but more of a feel.It is very well made. It is very easy to adjust and is very accurate. It even has reverse torque. I would highly recommend this wrench. I also bought the CDI 1503MFRMH 1/2 drive wrench which covers 20-150 foot pounds and this wrench covers 3-20 foot pounds. So with two wrenches i can basically torque anything I need to.

Comes pre calibrated with an official certificate of calibration. I have used many types of torque wrenches from snap on to proto. The quality is very high, features 3 positions for torquing application, Clockwise, Counter Clockwise and a neutral FIXED setting for those tight spots but best for use with a crows foot, that way the rachet is fixed to hold that 90 degree angle. Only draw back is that product has some type of plastic on it for the socket release mechanism, although its plastic, it is durable, but i would prefer steel.

I had to put new lifters and a cam in my 2007 Silverado. I already had two Snap-On torque wrenches. One up to 250 ft-lb and the other up to 100 ft-lb but didn't have one that does the really low torque settings. Since I no longer work professionally as a mechanic I didn't want to buy a Snap-on in the neighborhood of $300. I learned that CDI make the Snap-On branded torque wrenches with the only differance being the ratch head. This turned out the be a very nice torque wrench at a perfect price point. Anything cheaper is total junk and anything nice is priced really high. Only complaint is the ratchet head, not as nice as a Snap-On but I'm really not complaining for the price. I would definitly buy another CDI torque wrench if the need came up.

I purchased this wrench online and purchased an IKON ft lb wrench at harbor freight. Sadly to say the IKONis much better quality. A. The on/off switch is metal not plastic like CDI B. The "rivet" near the top on the CDI seem weak compared to the IKON. I'm sure the CDI is a great wrench but I believe the IKON a bit better.

This is the nicest torque wrench I've owned, after almost 5 years of use on different motorcycles, on critical bolts it's been very reliable with a smooth click motion. It feels consistent. Would recommend as a tool you can "trust" without breaking the bank. Only complaint is the reverse/fixed switch stays in place but could be a bit firmer (easy to knock out of position).

CDI Torque 2502MRMH 3/8-Inch Drive Metal Handle Click Type Torque Wrench, Torque Range 30 to 250-Inc Let me start off by saying this is an AWESOME torque wrench. Yes the price is high. Yes you could get one for much cheaper. But there are 2 HUGE reasons why this is a better torque wrench than most. 3/8 drive with INCH pounds!!!! I cannot tell you how freaking hard it is to find a torque wrench in inch pounds with 3/8 drive. Every spark plug socket I've ever used is 3/8 drive and every inch pound torque wrench I've found is 1/4, which means messing around with adapters that throw off your accuracy. I'm not about that life. Speaking of which.... It is ACCURATE! + or - 4% at this small of a torque range means when that wrench clicks you are right on that specified torque. This is critical for things like spark plugs, valve cover gaskets, oil pans, coil pack screws etc. Having something accurate you can trust is critical, and this tool meets the bill. The wrench itself comes in a blow mold case with the wrench itself inside along with a manual and the specific torque test results done for that wrench. The outside of the case says that CDI is a Snap-on company (which it is). That should give you an idea of the quality you are getting. Warranty is about average at I believe 1 year, but the beauty of a wrench like this is that it wouldn't be silly to get it recalibrated after so much use. Would recommend.

I was appalled to receive the torque wrench Shipped in a flimsy paper package. Upon inspection of the torque wrench it, it had grease, like mechanic’s grease and thumb/fingerprints all over it. Furthermore, the torque was not set at the lowest setting (57-inch pounds). The torque wrench appeared to be used and I can only surmise it was returned and reissued. I am USAF retired that worked and managed aerospace maintenance; if the torque wrench was returned, it is prudent to have the torque wrench recalibrated or tested before returning it to service or sale.

I looked at a few cheaper models but the reviews on build quialty were not great and what's the point of a torque wrench if it can't be trusted. I have this torque wrenches bigger brother the 1/2 drive one and love it and this one is of the exact same build quality only smaller. It's essentially a snap-on brand (even says so on the label) some moan on about the head is inferior. I can't see why, I've used mine a lot and it's never missed a beat (or click). As accuracy it comes with a sheet but I haven't taken it to calibration shop but for my needs it seems right. Now I just have to save up for the 3/8 drive (10-150 lb) one and I'll have the set ;)

Small, fits in tight places, nice distinct click, reversible ratchet, works as it should. Only complaint is I need my glasses to read the setting.

Exactamente lo que necesitaba y con un tiempo de entrega excepcional

Really nice torque wrench. Short enough to fit into tight places. Very precise, company says accurate to +/- 4%, but the calibration certificate that came with mine was within +/- 1.5%. Only thing I didn't like was the switch on the ratchet doesn't have a positive detent, it's very easy to switch it when working in a tight spot, not worth removing a star though.

works great and the larger range is just what i needed. saves me from carrying 2 torque wrenches in my service kit.

Well made, easy to use and very precise