SPACECARE Retractable Workbench Casters Kit, Heavy Duty Workbenches Wheels with 800 lbs Capacity, Adjustable Workbench Casters for Workbenches, Tables, and Cabinets, Easy to Install 4 Pack

The SPACECARE Retractable Workbench Casters Kit is like giving your workbench a set of monster truck wheels—suddenly that 600 lb beast glides around the shop like it’s on roller skates. The heavy-duty design feels rock solid, and the retractable feature means you can roll your bench into place, then lock it down so it won’t budge an inch. Installation is straightforward, and once mounted, they make moving bulky workbenches, tables, or cabinets almost effortless. If you’ve ever pulled a muscle trying to shove a heavy bench across the garage, these casters are the upgrade you didn’t know you desperately needed.

I use these on a large 5' x 9' heavy model railroad layout. They work awesome, the thing just glides across the floor when needed, and the fact that the table sits down on its actual legs when these are retracted means that it remains extremely stable when you are not moving it around. Awesome for heavy carts or workbenches, where stability is important while stationary. Love these.

I was always moving my one workbench around and decided to try these casters. I really like these. It fit my application and now makes it so easy to move the bench. They are very sturdy - I looked at some others and these hold more weight than I needed but I was drawn to them. Only thing I would caution folks is when using the template to mount, make sure you do NOT put upside down. I see (or checked/tried) hole pattern and the bottom holes on brackets are different from top. It was easy to mark and install. I did however mark the bottom hole pattern on the bench leg after I centered it on the leg, then pre-drilled holes and mounted bracket. Then drilled pilot holes for top part of the mount and used screws provided. Worked very well. For company - future updates I would apply a means to attach each wheel to a bar or wood bar in order to raise both casters at the ends.... I found a place on youtube whereas someone did that and it looked really to use versus one at a time. Depending on the users application this configuration with a bar would be easy for heavy instances. All in all, great purchase.

Fast delivery and a quality product. Assembled without flipping the bench over, worked perfectly!

Bought a few sets of these and love them. Just about all my stuff in my garage is on a base with these so they can be moved around but then set solid on the ground. Perfect solution

These casters are fantastic! I installed them quickly and easily with the supplied template and retainers. I installed them to a heavy bench. With the six hundred pounds capacity they are stable. As a cripple it's important for me to be able to move tables and benches easily. I can raise or lower the casters with my cane. They lock in place with ease. I can easily move this bench with one hand. Even when I have a couple hundred pounds of extra weight on the bench. Being able to move it with one hand makes it much safer for me. I'll be putting these casters on everything.

Floor-standing 6-inch jointers and 13-inch planers both need a base of nearly 2 ft x 2 ft. A handy lumber to use for a base is 5/4 (actual thickness = 1 inch) deck planking, which is heavy & strong yellow pine - and inexpensive. The 1-inch plank thickness works well with all the 1-inch #10 screws used. An 8 ft plank length is marginal, but they also come in 12 ft length (usually straight, but check). A 250 pound jointer can be outfitted with a base without ever having to lift it. Screw & glue a 3/4-inch thick x 1-inch or so wide runner along the inside bottom of two appropriate lengths (about 2 ft) of plank. Five 1.5-inch #6 or #8 screws should hold on their own if glue bond not strong. Tip the the jointer over until more than half of its housing length is resting on the two opposite runners. Use a rubber hammer to tap the two runners on their sides to keep containment, and tap them length-wise until they line up at each end ready to have the front & rear planks attached. Use 4 heavy gauge outside corner braces needing six 1-inch #10 wood or sheet metal screws each. If you mount the bottom of the caster wheel plate 1.75 above the frame bottom, the frame will clear the floor by 3/4-inch with wheels down, and rest solidly on its own legs with wheels up. (Keep focused on which way is up for the caster frames.). Be sure to leave a little room near the runner endpoints so that the jointer legs can reach through to the floor when wheels are up. The operation of lowering and raising the wheels is reasonably easy. The caster wheel assemblies come with everything needed, complete with lock washers and 24 1-inch #10 screws. Great product! A planer stand can be built with 2x3 legs, a 3/4-inch plywood top on a standard 1x4-inch board top frame, and the same 1-inch planking bottom frame. Screws of appropriate length can be used to secure the 2x3's to the upper and lower frames There are many mating surfaces in such a stand, and these can be glued & screwed to give strong stability with wheels up.

Super 👍

Should have bought these years ago as they help save and create space

Very impressed with this product, just what i needed.

اذا كان لديك طاوله طويله وثقيله للتحريك بشخص واحد فهذه العجلات عند تثبيتها على ارجل الطاوله تستطيع تحريك الطاوله الى اي مكان تريد بكل سهوله تم تجربتها وقد ادت العمل بشكل ممتاز

Installed these on a table saw stand I built. Working very well. My stand isn’t overly heavy but I wanted the foot leavers big enough that I don’t need to bend down or fiddle with finding them. These are nice and easy to install if you’re handy. If you have only basic carpentry or mechanical skills you may find it tricky to tighten the nut down on the wheel post but it is doable with a flat wrench to hold the base