UpBright 9V AC/DC Adapter Compatible with Line 6 FX100 DC-3g DC-3 Teac 98-030-0041 NSA27EP-090300 M8H-27US08R M8H-27USN09 HD300 HD400 HD500 HD500X 99-060-1705 99-060-2105 HX Stomp Multi Effect Pedal

I ordered this for my Line 6 Pod HD500X. The Pod uses 9vdc, negative tip. I was happy to find after receiving this, it measured with a meter 9.28vdc, was in fact negative tip. Issues i have had with other adapters was they say they are for the HD500X, but are positive tip and the connectors don't fit correctly. Causing the HD500X to go off and on intermittently when you step on a foot switch. This one the connector fit correctly. Glad I bought two of them. One to keep as a backup.

Good cord for my Line 6 HX Effects and is compatible and no problems with it at all. The noise level sounds fine and it fit perfect! I have this plugged into a power conditioner and it seemed to work good and the noise wasn't really there. Overall it works pretty awesome and powers my Line 6 HX Effects perfectly!

I use this for my Line 6 PODHD500x. Has worked well for several weeks now. No issues. I actually bought 2 of these so I can keep my original on stage so I don't have to pack it up every week, and keep 1 at home to practice with, and have another in my bag at all times. I don't like the little extension, which I assume is what converts the adapter tip to "center positive," because without the adapter the POD does not turn on. As soon as I put the converter tip on it, it works fine. The tips look exactly the same so I thought it would work without it. Nope. My only reservation about the converter tip is I don't like having an additional vulnerability of something coming unplugged. Although it feels like a pretty secure connection, I taped it anyways just to be covered incase someone trips on the line or something. This is much better than spending $35 on an original power adapter, which is just highway robbery for something that probably costs $5 to manufacture.

I saw another reviewer post that it added noise. That concerned me, and almost didn’t buy, but price was good. I am happy to report that my HX Stomp is silent using the new power supply, through my SVT4 & 810E. I’d venture to guess it was something else in his setup causing the problem. I’m quite particular about having a clean, noiseless rig. Happy to throw this in a gig bag as a spare or travel if I take the Stomp without my pedalboard.

Does not fit Line 6 HX Stomp. The HX requires a 2.5mm inside diameter, this is 2.1mm. It can be forced on to work but causes a lot of stress on the HX Stomp jack. Otherwise the voltage and amperage is correct for HX Stomp. Returning.

What can I say other than it works for me on my POD Go. Seems to be a bit more "robust" than the original unit in terms of wire gauge. Verified center negative. Cool as a cucumber to the touch. Good to go.

I noticed my stock power supply wiring (copper strands) was starting to show through the insulation at the ferrite choke. This is a perfect replacement. I like how the plug at the HX Stomp is straight and not angled (like the stock one is). Cord length is 57 inches. Would be great if it was longer. I confirmed the polarity is correct with positive outside and the center is negative. DC output confirmed at 9.27 volts. I measured the stock power supply and it was 9.16 volts. Certainly close enough. Overall very happy.

Works well for the line6 hx effects pedal

I shopped around for a transformer / power brick for the Line 6 Amplifi TT that I picked up for a steal on Reverb. The specs for this were a little odd, with the combination of plug configuration, amperage and so on making it difficult to source for a reasonable price. This fit the bill, and works great. No humm or feedback, nice long cords, decent quality and feel... good deal. Would totally buy again!