3 idea Imagine Create Print PLA+ 3D Filament 1.75 mm (Blue, 1 Kg)

The 3Idea Technology PLA White Filament is a high-quality filament that is perfect for 3D printing. It has a dimensional accuracy of +/- 0.03mm, which means that you can expect consistent and precise prints every time. The filament is made from high-quality materials that ensure durability and reliability. It is also easy to use and works well with a wide range of 3D printers. The filament is compatible with 3D printers that support 1.75mm filament. The 1kg spool of filament is packaged in a vacuum-sealed bag with a desiccant to ensure that it stays dry and free from moisture. The spool is also easy to load onto your 3D printer, thanks to its design. Overall, the 3Idea Technology PLA White Filament is a great choice for anyone who is looking for high-quality filament for their 3D printer. It is easy to use, reliable, and produces consistent and precise prints.

Decent filament but packing could be better. Ita not vaccum packed. Had gotten the first one replaced at it seemed loosely packed and used.. The replacement turned out similarly packed but decided to try it anyway.. Prints came out fine.

Silver Abs filament. Prints well but need more adjustments on settings. Current setup print quality is good. Current temperature 250c - 110c. Printed on Creality Ender 3. Print quality can be increased by changing settings. The material is strong with 10-15 % infill with 3 loop wall.

The filament is very bad. The print had so many bulges and lines. The parts come out very brittle, most break while removing them from the printer. The bed adhesion is the only good thing with this. Wol3d works much better for me. Wont recommend this to anyone with bambu.

Like others have stated, its main issue is inconsistency. Its stringy and doesnt matter how much you tweak the retraction, it deviates soon and you end up with a lot of stringy goop. I have had a few prints fail because of clogging and low bed adhesion as well. Bed adhesion can be improved via brim settings. end of the day, it is what you pay for. This is the cheapest filament out there, and will be good for prototyping UPDATE after using 1/4th the spool: First layer temp - 210C Print temp - 205C First layer bed temp = 60C printing bed temp = 50C Retraction 8mm I used it on my ender 3, with a custom part cooler shroud. Part cooling is important for this filament as it is quite goopy. With these settings you will get decent prints, however the moisture in the filament causes issues with finish. i bought another similarly priced spool (elegant goop) *wink* and that filament is 100x better than this for a slightly higher price.

EXCELLET FILAMENT , MAKE SURE UR HOTEND HAS PROPER COOLING , JAMMING IS NOT VERY MUCH . COLOUR SAME AS SHOWN (IN MY CASE METAL BLUE AND GOLD)

Good one but not the best worth for the money that's it ♥️👍

Nicely vacuum packed. Does have good strength as it did not break while hanging from spool to printer. Though recommended temperature for printing is 190-210., it did have problem in adhesion which was resolved by bringing bed very slightly close to nozzle and increasing extruder temperature for first layer to 205. Now perfect adhesion. I think it's probably because of higher strength of material. I would recommend this filament and will look to buy in bulk if seller gives good deal. Update : Included video of print quality. Printer is Ender 3 with skr mini e3 board, model printed is baby groot cup. Model is really smooth, nice filament. As you can see in video it is printed without supports and excellent bed adhesion with manual bed levelling only.