Massca Aluminum Pocket Hole Jig System Pro M2 Adjustable & Easy to Use Joinery Woodworking Tool For DIY Carpentry Projects

Since it's made of aluminum, it feels like a well-made product that will last a while. I decided to go with this over the Kreg brand mainly for that reason. It works quite well, and the drill bit that's included for the pocket holes seems quite sharp and makes the holes quickly. I like the size as it sits without moving and can be taken apart if you want to use it without the base.

I started out with a cheap pocket hole jig kit. It had a hand screw to tighten and loosen the clamp. While it worked, there were so many drawbacks. I was torn between Massca and Kreg for my replacement. I followed the advice of a YouTuber (that uses and reviews lots of woodworking products) and got this one. Man, am I glad I did. It's hard to express how much I like this one without turning this post into a rant against my old jig. But Here are my top Pro's: - The CLAMP is by far the best feature. Being able to lock my piece, drill my hole, and unlock to move to the next hole/piece in seconds has saved me so much time. - The stabilizing arms are great for wider pieces that tend to tip over when too much weight is on one side. - The included drill bit is so smooth in the drill guide. It doesn't bite and grind into the guide like other brands. I was also expecting some metal shavings as the bit and guide were "broken in", but nothing like that happened. Still buttery smooth after several uses. The Bit is also designed to fit very well in my drill. This was unexpected as I'm used to a bit that seems more destined for a drill press. - The lock ring/drill stop is very well made and locks very well onto the bit. It doesn't cant/lean on the bit, slide during use, or work its way loose. The design seems to have though in advance not to conflict the stop key and the bit grooves with each other. I've had this on other pieces and it can be very frustrating to deal with. - Adjustment on the pocket hole guide block are really easy to make, with preset measurements already there that are easy to read and set. - Built-in dust collection!!! This was huge for me. The dust collection port is the perfect size for my shop vac hose. I can connect it, power on the vacuum, and drill away with zero dust build up. This has made a big difference in my shop. - Mounting holes and screws are available with this product. I took full advantage and mounted it to a piece of MDF scrap I had. This gave more stability, easy storage, and a nice work platform that I can move around as needed. - Most pieces came with its own protective case. Like the drill bit came in a plastic box to protect it when not in use. Granted, I don't use it, but it is a good design and gives a little bit of thought to the producer that they went above and beyond when putting this package together. Some things I don't like (but can probably live with): - If the clamp is not adjusted just right, the rubber ring that holds pressure on your piece can leave an impression on your workpiece. I've started using a small scrap to take the pressure instead of the work piece and that has made a big difference, even though it gives me another piece to work with. - The depth stop guide will most likely get lost. I like it, and its functional as a component, but being lightweight plastic and having to be removed after each setup means it has to be stored somewhere. I'm trying to keep my parts all together, but I just know that it will eventually be lost. A different design for that setup might be necessary. - This could be user error, or cross brand conflict, but I've noticed the holes of the pocket holes don't seem to go as far as I would have expected. I have my stock pieces set properly and the depth stop set for the appropriate thickness, but the screw heads seem to stop just before full concealment. I'll change screw brands and see if that makes a difference, but that is something I will definitely have to adjust for in my builds. Other notes, - I have not used the screws that came with it, yet. So far I've used what I have in my stock. Once I have a chance though, I'll try them out and make a separate review.

Works great. Solid construction

Full disclosure; I have only made 16 pocket holes with this newly-arrived jig. But I have been building items with pocket hole jigs for two decades. Here are some things that have impressed: (1) Solidity. Aluminum vs plastic housing - no comparison. Knurled brass knobs for securing adjustments are great. (2) Dust collection - I had no idea how much cleaner my shop would be, or how the hole quality would be improved with a lack of chips while drilling. (3) Ease of use. Clamping the piece between the aluminum housing and a rubber-faced toggle clamp provides a super-secure workpiece while drilling. "Outriggers" (on the Pro system) support the workpiece nice and level. I attach the jig securely to my workbench with the same clamps I use for my track saw. Adjusting for different wood thicknesses is easy with clear marks on the housing. (4) Overall quality feel - just excellent. My first couple of holes looked a little ragged. I saw comments to this effect in some other reviews, and I expected this was more a result of the drill bit and not the fixture. I wasn't deeply concerned, because I don't use pocket holes where they are visible, and I have plenty alternative bits for making pocket holes. But being a little fussy, I adjusted my technique to make multiple "plunges" with the supplied drill bit, and the hole edges became really clean. Overall: I should have bought one of these fixtures a long time ago.

This pocket hole jig is very well constructed. It's all metal and should stand the test of time. My only complaint is the drill bit was not straight. It worked, but I bought another. I know Massca doesn't make the drill bits and, probably, doesn't inspect every drill bit. That is my only complaint. I used it for over a hundred holes and it worked great. Very easy setup and great results. I am very happy with my purchase. I knocked off one star because of the drill bit. Otherwise a five star product

I'm new to woodworking and was almost sold by the blue plastic brand, until I saw this all-metal jig. It's less expensive, plus I can hook my shop vac to it to collect the saw dust. It was simple to use out of the box. I've already completed 2 large 8 x 4 raised beds using this pocket hole jig!

A game-changer in the world of pocket hole joinery, and let me tell you, its all-metal construction and design put the plastic competition, ahem, Kreg, to shame! From the moment I held the M2 Bundle in my hands, I could sense the robustness and durability that the all-metal construction brings to the table. This thing is a solid piece of machinery that doesn't just get the job done; it does so with a level of confidence that you can feel in every drill. The Pro Aluminum design doesn't just add a touch of elegance – it screams durability. The anodized finish not only looks fantastic but also protects the jig, ensuring it can withstand the rigors of regular use without breaking a sweat. It's like upgrading from a plastic tricycle to a sleek metal bicycle; there's just no comparison. The versatility of the M2 Bundle is nothing short of impressive. Its ability to handle various wood thicknesses and angles is a testament to its thoughtful engineering. The adjustability is smooth, and the precision it offers ensures that your pocket holes are on point every single time. Now, let's talk about the drill guide block. This thing is a masterpiece. The confidence it instills when drilling pocket holes at the perfect angle is unparalleled. It's like having a woodworking mentor whispering in your ear, guiding you to flawless joints. And the dust extraction port is the icing on the cake, keeping your workspace tidy and clear. What truly sets the M2 Bundle apart is its comprehensive nature. The included accessories, like the clamp adapter and face clamp, turn this into a complete system that meets the needs of professionals and hobbyists alike. It's not just a tool; it's a woodworking companion that elevates your projects. In conclusion, if you've been using plastic pocket hole jigs and are ready to step into the big leagues, the Massca Pro Aluminum Pocket Hole Jig System - M2 Bundle is your golden ticket. Its all-metal construction not only puts the plastic competition to shame but also sets a new standard for precision and durability. Say goodbye to flimsy plastic – the M2 Bundle is here to redefine your pocket hole joinery experience. It's not just a tool; it's a metal marvel that deserves a prime spot in your workshop. Highly recommended!

I had never used before but this worked flawlessly first time.

Excellent tool, easy to use especially for a amateur like myself.

Producto de buena calidad , muy recistentete y los acabados son perfectos

Item was fantastic and on-time (in fact early)!