Apoxie Sculpt - 2 Part Modeling Compound (A & B) - 1 Pound, White/Stone White

Used for customizing my tabletop war-gaming miniatures and repairing damage to resin figurines and sculptures.It works like GreenStuff if you are familiar with that. mix part A and B and then you have some time to sculpt it into whatever you want. As it cures it goes through various stages of workability. It will be a little more sticky early on and then as it firms up you will be able to using sculpting tools to create all sorts of detail with finer details being easier early on and smoothing being easier a bit later. Once cured it is very hard and can be sanded or painted.Between this and some model paints I've been able to save quite a few little resin figures that got chipped when they got knocked of their shelves. When done well the repairs are barely noticeable and very well adhered to the original piece.Once cured it lasts forever and doesn't discolor but stored in the tubs I've noticed that my part B developed a yellow orange film where its exposed to air. Part A has no problems. They still both work even with the yellowing of the top of the part B stuff but even after over 8 years of having the tubs the stuff under that top yellowed layer still looks fine.

I have used over 8 pounds of this because I do a lot of repairs on my sailboat and use it for so many things.It really is a very good Epoxy. And it can even Harden underwater. It sets up Fairly fast, but not too fast and gives you the time to work with it. What makes it so easy to use Is that The wo parts Are colored white and Gray, so it's easy to mush them together until one solid color Which turns out to be a off-white color in my opinion. Once it's one color it's ready to use. The last order I sent was 1 pound. to my brother-in-law and his wife but usually I ordere 4 pounds of it as it does not seem to spoil or get hard Over time And I have been able to use this after it's been in storage for Over a year. I highly recommend it.For home, use or boat, use anywhere really.

This stuff is AMAZING.... I have used many different epoxy putty products. They don't hold up to this at all. This stuff stays pliable for hours making it very easy to work with. It cures very slowly giving you time at different phases to smooth it out, join new parts etc. After about 3 hours it's in a pretty rock hard state. After 6 or so hours it is incredibly strong. After 3 hours I was able to drill and shape it with a dremel and sand paper. I will be keeping pounds of this stuff on hand as it can fix almost anything. Paintable, water proof and so easy to work with. It's long workable time is very convenient unless you need a quick set product. I'll keep a tube of quick steel on hand for very quick fixes but will use this stuff for everything else..

I do a lot of hand sculpting when making dioramas and this stuff is awesome. It gets easier to work with once it sits for a little bit. Using water to wet it and smoothing works great. I have bought this several times and it will always be my go to modeling compound.

I know, people here think that this stuff is expensive. And that is because they are ARTISTS, not BOATERS. Wait until someone take the same product and puts it in a box written "marine" on it, you'll see. For a boater, this stuff is a hidden gem.I was looking for a better alternative than the overpriced marine-tex and other crappy epoxy available in the marine world, not even because of the price, but because of: 1/ the crazy toxicity of the marine products 2/ the ridiculously short working time 3/ the hard to smooth, impossible to shape texture 4/ the necessity to sand forever after it dries (because you couldn't get it perfectly to shape). 5/ the waste of half of the product on the mixing surface and mixing stick, and the other half while sanding the excess (yes, I know, that makes 100%. I'm exaggerating, but just a little)THIS PRODUCT IS A MIRACLE. Let me list here the amazing benefits of this product:1/ it is epoxy. This means super strong, waterproof, UV-resistant, can be used inside, outside, underwater, under the water line, on wood, on fiberglass, on metal, on whatever you throw at it. Epoxy rules.2/ it is EASY to mix and work with. As easy as play-doh.3/ it is VERY EASY to smooth/shape/blend! just put soapy water on your finger and it becomes a magic wand. you can blend pieces together, smooth them out, just by passing a finger on top. Crazy.4/ there is a GREAT working time of over 2 hours. No rush, mistakes can be corrected easily.5/ there is virtually NO WASTE, as every little piece of it can be collected and reused (within the 2 hours). This makes this product infinitely cheaper than any other epoxy mix, where the waste is the major part of the product.6/ it doesn't create an expensive mess. It is easy to clean, easy to apply, easy, easy, easy.7/ it SAVES A TON OF TIME. The ability to smooth it, reuse it, cut it, modify it, work on it without rushing, makes it possible to create a finish product in one step, with no need for sanding, no need for cleaning (both can be very time consuming with regular epoxy / fiberglass).8/ it is NOT TOXIC like other epoxy! No crazy fumes when mixing, and the product won't burn a hole through your hands if you hold it. In fact, you can be in direct contact without feeling anything, and cleaning your hands after is a breeze. No more working with a respirator and gloves! As a disclaimer, I'd say that I don't know for a fact that it is not toxic, but it doesn't feel or smell toxic in any way. If you've been working with marine-tex, you'll know what i mean.9/ Of course it dries by itself, which is normal for an epoxy, but I guess that if you're an artist, you care about that (as opposed to clay).This stuff is my new religion. Seriously. One thing, though: it is NOT WHITE. it is a light shade of gray, very pleasant, but not a white. However, it is epoxy, and can be tinted, painted, stained, varnished, whatever you need to do to color match (which is always necessary anyways, even for white on white).BOATER FELLOW, DIYers, Homeowners, BUY THIS STUFF! As for artists, I don't know how it compares to other products, but my guess is that it will be pretty hard to beat this champ.