Hantek CC-65_N AC/DC Current Clamp

Q: Will this probe be used with Rigol oscilloscope model ds1054z?

I am using it with a different scope so it will wprk with Rigol too.

Q: will it work with a handheld hantek scope? and how to set it up? kinda confuse because its not an automotive scope.

It does not need to be an automotive scope. Connect the probe to the scope‘s input (BNC connector) and read the voltage indicated by the scope, then convert that voltage into current depending on what sensitivity the probe is set. An example will be reading 300 mV pk to pk and the probe is set on high sensitivity range of 1 mV per 10 mA, which will translate into 3000 mA pk to pk current.

Q: Yes i want banana plugs to plug into my fluke. how do i "tell you"this request in the order?

This listing is for clamps which have BNC connectors only, you would need to buy a BNC to banana plug adapter to use with this model or find a listing with banana plugs.

Q: Will it distort, or is it able to accurately measure peak inrush ac current to a 15 amp 24vdc ac to dc switching pwrsup ac input and its dc out?

Depends on the current. In rush current can be 100's of amps. It will distort. Steady state input is very measurable. The output current during power up is limited by the regulator, and is most likely under 65 Amps. Also the current probe doesn't flat line at 65 Amps. The fan on my truck took 120 Amps peak during turn on, and the wave form didn't look clipped or distorted. The Hall effect device becomes non-linear on over range, but still works.

4.5/5

ID del producto: 224050506

Transacción segura

Detalles

Brand
Hantek
Power Source
Battery
Style
Electronic
Color
black
Item Weight
184 Grams

Comprados juntos con frecuencia

Hantek CC-65 AC/DC Multimeter Current Clamp Meter with BNC Connector Up to 20 kHz 20mA to 65A DC

Hantek Oscilloscope Accessories Set HT30A Auto Test Leads HT307 Acupuncture Probe Set HT201 20:1 Attenuatorand for Automobile Measurement Work with Oscillograph (HT30A+HT307+HT201)

Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator

Descripción

Hantek Hantek AC/DC Current Clamp CC 65 Up To 20 kHz 20mA To 65A DC
Brand : Hantek
Standard USBXI (TM) interface, easyly inserts into USBXI (TM) housing to make up a combination instrument

Hantek CC-65_N AC/DC Current Clamp