Mousike Cabinet Pull Metal Template， Handle Drill Mounting Template for Cabinet Doors and Drawers(Silver,1Pack)

Simple and accurate tool. The markings are easy to read and is useful for both 5" and 10" handles. I added some tape to cover the non-used holes to reduce the chance of drilling the incorrect hole. I put in 40 handles and no errors. Amazing!The addition of a spring clamp kept is aligned during drilling holes.

It was a bit tricky to get the hang of it because there are no instructions included. Once I figured it out it was easy to use. I will say it has different holes for different size handle spacing. I was rolling right along until I almost drilled the wrong hole, almost. Find your holes first and cover the rest with a piece of painter's tape so you don't drill the wrong hole. Just leave the 2 that you need open and the rest coved. I did clamp it in place and drilled them while it was still mounted instead of marking the hole and removing the jig and then drilling. The provided drill bit is of very good quality as well still going strong and has a point so it doesn't slip. One last thing, as this is metal and not plastic it may scratch a bit so you may want to add some painter's tape to the backside as well.

This product hits a good middle groud btw the smaller, plastic cabinet handle templates and the large adjustable ones for pros. It worked well enough, but a few small tweaks would really improve the usage. To start, the edges on mine were razor sharp. Sharp enough that basic handling or sliding your finger across the surface was able to give small "paper cut" scratches. I wrapped painters tape around the whole thing once I had my dimensions set. Secondly, if the preset depth holes are not to your liking, there is a slot you can set the stopper edge into to get the exact distance you are looking for. That's the good part. The problem is that it is only marked on the top side, but the screw-down nuts are large enough that they block view of its precise alignment. Adding the same markings on the underside of the template would solve this issue completely. And finally, the supplied drill bit, while a nice inclusion, was the dullest new bit I've ever encountered. It had the sharp center-point tip, supossedly to keep it from "walking" as you start drilling, but it was not sharp at all and was actually rounded over, so that the bit did the exact opposite and wanted to slip around before the hole got started. On top of that, the bit itself was so dull, I had to press VERY hard to make each hole. It's like using a dull kitchen knife. More chance for problems and mistakes when you've got to press so hard. I grabbed another used bit from my garage and it went right through with ease, just like you'd expect.Even after the compliants, I'd buy it again, knowing that the price was fair and using it is far better and faster than manually measuring each cabinet handle location. Just have your own fresh drill bit handy in case the supplied ones are all super dull.

Not sure how to use this!

Muy fácil de utilizar lo necesitaba para unos handles de 8 3/4 y m funciono bien lo único que solo lo pude utilizar en las gabetas

Anyone who is putting on cabinet knobs, but this! It was such a breeze. I swear it saved me at least an hour or more on a medium sized kitchen.

This worked so well for our cabinet knobs and drawer pulls. The pulls got tricky with the different size drawers but we were able to adjust this device and make it work. We followed others reviews and used tape on front and back to prevent scratching and cutting.

It can be accurate, but it really can be difficult to adjust with sliding guide. I found that drilling with it in place can make it move because of how thin it is. Other designs have drill guides to keep bit straight. This is good for marking not actually drilling