Aideepen W3230 20A 12V Digital Thermostat, Digital Temperature Controller Regulator Heating Cooling Control Thermometer Instrument

Works excellent controlling fans in the caravan fridge in hot weather set at 39° with a 4° waiting works perfect

I installed this in my VW camper to switch on cooling fans to increase the airflow around the back of the fridge - works perfectly, very easy to install and configure and particularly liked the length of the temperature sender lead. Display is easy to view and the power draw is minimal, I have it set to switch on the fans at 25c. Highly recommended.

Does what it is supposed to do but I have a few comments. The instructions show two diagrams for connecting a 12V load and an AC mains load. These are labelled the wrong way round which could be dangerous for anyone who doesn't know what they are doing. The specified load is 20A but the connectors are small for the cables that would be advisable for that rating. 1.5 mm2 is about the maximum size that will fit.

Once you work out the functions it works very well.

Could do with a link to an instructional video as they are rather complicated to set up. I fully understand the lack of written instructions due to the complexity, the Instructions would take up more space than the item itself !

I’ve used this to bypass the faulty control circuit in my campervan compressor fridge. It works perfectly, cools down to 4C, then switches off. Comes back on at 6C and cools down to 4C again, and so on. Easy to set up, just follow the instructions on the sale page.

Worthless, didn't Wark at all just some lights and that's it. Tested re tested, didn't bother to even claim,

I already had everything I needed to complete a DIY filament dryer box, minus one digital thermostat, with the ability to switch 12v at 2mps. This little cheap and cheerful gizmo seem to suit my needs. I used it to switch a 12v 100w Peltier car heater. I found playing around with the unit revealed additional programming menus not documented. In fact the unit came with no wiring or programming instructions, however a little digging around on Google I soon found a fairly descriptive English manual in PDF format for model W3230, after which programming was easier, but still awkward to navigate using three sketchy buttons. Pro's It's a cheap solution, that once you've got your head around the secret menu, it's a fairly easy and useful digital thermostat. It can be set to operated between a wide range of temperatures. With selectable software based NO/NC operation from a SPST 12v relay. Although it's plastic housing initially appears somewhat flimsy and fragile, once mounted into a panel those vulnerabilities effectively disappear. I needed to maintain a steady enclosure temperature between 65~75 degrees, which it does so without issue. Con's: The status LED on my unit was misaligned with it's aperture, but was an easy fix. The screw terminals are not anchored to the circuit board, excess force can easily damage them. Conclusion: You get what you pay for, it does what it says in the listing.