🎉 Elevate Your Drive with Unmatched Sound Quality!
The MB Quart DS Inch Shallow Subwoofer is engineered for car audio enthusiasts seeking powerful sound without sacrificing space. With a maximum power of 400 watts and a shallow mounting depth of just 2.95 inches, this subwoofer features a dual voice coil for enhanced clarity and easy installation, making it the perfect upgrade for any vehicle's audio system.
T**C
2005 4 runner champ!
Easy to install and performs well in my 2005 4 runner v-6. Fits very well and sounds good.One installation tip: several internet videos show how to install the subwoofer of a generation four (includes the 2005) 4 runner. The videos instruct the installer to dismantle MUCH of the trim on the floor, interior sidewall, and even the right rear seatbelt. Many screws, panels, yanking and pulling!One video suggests a much easier way to swap out the rear sidewallsubwoofer. I tried it, and it works like a CHARM! No screws, panels, carpet, or seatbelt to deal with.You simply cut out the grooved perimeter of the integral sidewall screen that guards the surface of the original subwoofer. Use a sharp, heavy duty utility knife and carefully work your knife around the outer groove of the screen. Take your time and don’t slip with the knife.With a few passes the entire screen will drop out of the rear sidewall. Trim up any ragged edges.The entire subwoofer can then be accessed easily. It will be staring you in the face.Carefully pull apart and unscrew the trim on the original subwoofer. Eventually, you will expose the six or so screws that hold the subwoofer in place. Unscrew the unit from its anchor points , pull it out gently and then disconnect the electrical connections. Note that the connections of the old subwoofer will not fit the unit I bought in this review.Most likely you will snip off the plastic fittings of the vehicle wiring, expose some bare wire and then connect the bare wire from the vehicle to the quick-connect fittings on the new subwoofer.Most likely you will have to drill a few new screw holes in the ring surrounding the new subwoofer to get a secure mount. This is easy to do.Connect all of the color coded wires in the correct terminals (See multiple videos on this; again, easy). Test to know if the subwoofer produces sound from your stereo.Once the unit is wired connected and screwed in place place a bead of clear silicone on the edge of the panel screen that you cut out and replace the screen in the sidewall. I let mine cure for 24 hours. If you’re a neat worker no one will ever notice (except for maybe your dog) that the screen had been cut.A fast worker can replace the subwoofer in probably 45 minutes of easy work. It took me about 1.5 hours, because I’m slow.Don’t be afraid to cut that screen panel. I learned this technique from a guy who posted his how-to video on the internet. His is a great solution to an otherwise significant PIA.
J**R
2001 Suburban 2500 - great upgrade
Used this to replace the subwoofer in my 2001 Suburban 2500 which is not Bose but does have the factory subwoofer. This was plug and play and the sound is excellent!Note on the wiring - this has 2 separate input wiring connections. The directions are included, but for anyone who isn't sure how to do it this will require a little bit of extra wire. So just take 2 pieces of wire about 1' long each and connect the positive to positive and negative to negative. Then wire it into the vehicle using the OEM wires.
M**M
Nice replacement sub
Replaced the original sub in a 2003 Toyota 4Runner with the JBL Synthesis system. I was going to use the Pioneer sub that is a common replacement for this application, but it was on backorder. The MB Quart sub was $100 less expensive than the Pioneer, and with the power that the JBL amp runs the sub with, I can't imagine the Pioneer would sound any better. The build quality looks great, it sounds good, and was a great value. $65 well spent!While I had everything apart, I added a bit of Hushmat quiet tape between the tabs of the sub/amp enclosure and the metal body to isolate and eliminate a rattle from the lower plastic tab.
R**H
good for replacing subwoofer
Why did you pick this product vs others?:that's a great subwoofer. arrived one item on time, great value, quality, no damage, not testing yet, not installation yet, Performance:not known yetFunctionality:replacing itDistortion:goodClarity:goodPower:not testing yetBuild quality:premium
T**A
Little extra bump in the trunk!
Fit in my 2010 pilot factory sub location perfect! Sounds great.
M**K
2000 Suburban
Replaced the blown OEM subwoofer in my 2000 Suburban with this. Sounds great. Easy install.
A**R
Great budget sub for the money
Been a fan of MBquart for years replaced my stock 8in sub in my Ram 1500 with this MBquart sounds real good better than stock
J**K
May have to alter existing sub mounting hardware
Speaker works Great in my 2012 LS 460
Trustpilot
Hace 1 mes
Hace 1 semana