Puget SystemsAcrylic Development Enclosure for NVIDIA Jetson TK1

The 4 screws to hold the top were the wrong size, shipped with 6-32 but needs 4-40.

Heavy acrylic. Solidly designed with the board in mind with labeling for switches, connectors, etc. and room for a HD (though no spacer/hardware for the drive in the kit unlike the TX series device case).Well worth the $40.No feet, so they got dinged one star. Otherwise this would be a 5-star rated item

My package was missing parts. No screws to hold the top on even though the description says it should have: "4x .375 inch #4-40 screws (for securing the top panel to the 1.25 inch standoffs)"Even though screws were missing, it works. I'll order more for my other TK1s because there is no alternative and I can find replacement screws.Feb 2, 2016: Corrected the the comment about missing rubber feet. The product description says they are not included.March 12, 2016: >:-/ I ordered 2 more cases because I bought 2 more Jetson TK1s. The first case had all of the necessary parts. The 2nd case was missing 6 parts out of 12 (see picture). How hard is it to count to 12?

Good quality case and excellent response from company :)

This is the second enclosure I've bought for the Jetson TK1 from this seller and neither came with the standoffs and screws despite the product description saying it does. All I've received from both orders were the top and bottom acrylic panels (which I could've had cut myself).To seller: At $35+ each, you should not be greedy and actually include the parts you say are included.From the description: "Included components: ..... 4x .25 inch standoffs (for under the Jetson K1 board) 4x 1.25 inch standoffs (for on top of the Jetson K1 board) 4x .375 inch #4-40 screws (for securing the top panel to the 1.25 inch standoffs)"

A nice case to protect the Jetson TK1 board. The only thing missing were the screws to allow adding a 2.5" SATA drive without needing to make a trip to the hardware store. (If you don't plan to add a drive, this is a non-issue for you.)

Haha for real you guys what is the deal with the top plate just sitting on the top!?This is the first "case" I've seen for the Jetson so I'm going to let it slide that you're charging a premiium for such shotty work. One of the philips screws didn't have the head properly milled out so I had to use pliers to fasten it. Come on folks, get your wits together!

Works well. Simple to set up and use. Easy access to all hardware interfaces.