Patelai Knockdown Texture Sponge Drywall Wall Patch Ceiling Texture Sponge Home Decor for Repair DIY Painting Ceiling(2 Pieces,13 x 15 x 6 cm)

These are great paint sponges! They are and super easy to use. I made a lettuce planter out of a wood palette and use the to decorate the outside. They are thick, soft, hold paint well, and wash out with soap and water. They held up really ell with no shedding or flaking. I like that they’re designed rounded on one side and flat on the other. It makes it easy to paint small or large areas quickly and gives great control in tight spaces. Highly recommend!

Okay, not going to bury the lede, these things did an outstanding job. I had to repair a huge water leak in a bathroom ceiling, I lost half the room's ceiling so I replaced the drywall and had to try to match the existing knockdown texture on the other half of the ceiling. I used these sponges and the result is just seamless, nobody could tell there was ever a repair done. So they're good sponges and they get a five-star review for the results.But you also gotta know a couple of things. First, what you get is not what you think you're getting. You don't get a fluffy squishy sponge, instead you get something that looks like a nasty old McDonald's Happy Meal hamburger that's been vacuum-sealed in a NASA space meal pouch. It's a little tiny flat squished thing that would absolutely not pass any "is this a sponge?" test.Second, you gotta inflate it. They say leave it in a pan of water for a little while. Screw that, I left one in a pan of water and it took like TWO DAYS to fully fluff up. If you don't have two days to wait, submerge it in water and work it, squeeze it, roll it, smush it, etc, until it finally becomes a small half-dome shape. It'll get about as big as your palm, flat on one side and rounded on the other, and probably smaller than you were expecting. Don't sweat it, it's all good; once you get to that point you've got what you need.Then start the texturing job. Thin down some all-purpose joint compound in a drywall pan, and let it "set up" for about 10 minutes or so. Then smush the flat side of the sponge into it, then sqlorch it onto the ceiling, press it in, and then yank the sponge away quickly. You're trying to "draw out" the compound to stick out away from the ceiling, making little stalagtites. Do that for a while, I think I probably did it in about a 3' x 3' area before knocking it down with a rubber-edged knockdown knife. If it looks good and matches up, then go on to the next 3x3 area. If it looks bad, you can just re-sqlorch it and try again until you get it the way you want.It's a long tedious process, but the end result I got is absolutely fantastic. If you want to see a video, I watched Paul Peck's youtube drywall channel on matching knockdown texture and it tells you everything you need to know.

I'm amazed at how many reviews say they received a 'flat hard pancake.... nothing like the picture.... etc'. It's a SPONGE that's VACUUM PACKED! Simply throw it in water and in 5 mins it's fully expanded and ready to go!It worked OK for knockdown texture, although it's a bit small and I picked out some additional sponge material in the holes to get bigger 'peaks' in the mud. Overall not bad for the price.

Great sponge works amazing for my application would order again

Pretty nice for drywall texturing. Come flat as a pancake just open package and they will grow and look like picture. Great buy for the money. I’d recommend.

I thought it would be worth a try to patch up some Sheetrock texture. It works well enough for a knockdown texture but for my orange peel texture it was not too good. If you don’t have a heavy orange peel texture it works well. The price is so low it’s definitely worth a try.

These worked perfectly to match my knockdown after my learning curve.

The media could not be loaded. I was skeptical about these and thus ordered a bunch of texturing options at the same time. Now I think these sponges are a MUST HAVE for not only texturing but for painting in general.[Video taken at point of texture fully dry and starting to scrape, not yet primed nor painted.]I put the sponge in water, slightly wrung it out and dipped into a slurry mixture I made with Homax Wall & Ceiling Texture mix. Sponged overlapping layers onto each other, let dry and repeat. When fully dry, it might/will have almost ‘too’ much texture.. pointy bits that stick up and irregularities. This is good! I point these areas out in the video when the lens focuses.Take whatever size trowel you have, bigger the better; I was using an 8” until I found the 14”. Lightly scrape down the wall to even the texture out. Not too uniform, overlap and go in all different directions. I’m moving really slow in the recording because it’s difficult to film at the same time. :D You’ll see the dust pile up on the floor.Run hand across wall to find areas that are rough and don’t fit in. Scrape those down. When satisfied, I’ll next wipe down with slightly damp rag to pick up the loose dust, vacuum floor, let dry, and then paint primer and finish with wall paint.The texture pattern will lessen with each layer of prime and paint, so no need to scrape TOO much away in previous steps.I used the sponges again during final coats if the areas didn’t look like it had enough texture and was ‘flat’; lightly sanding after dry.Because of this, I think if you just needed to fix a small area, you could use just these sponges and skip the pre-texturing round all together. Love them. Would recommend.