Rogue MX Motorcross Grip Set Black Lock On

These grips are a major improvement over stock and even offer noticeably more cushion than ProTaper Pillow Tops. I went with these for maximum vibration damping and ease of install, and they delivered on both. The added diameter and soft compound really help reduce hand fatigue on longer rides.What You Get:- Left grip with internal clamp (clutch side)- Right grip with integrated ODI throttle tube- Multiple throttle cams for different bike modelsInstallation Steps:1. Remove old grips: Use a utility blade or compressed air to remove the stock grips. Clean off any glue or residue from the clutch side.2. Install Clutch-Side Grip: Slide the ODI grip onto the bar. It’s a precision fit, no glue needed. Rotate to preferred position (usually with the “Rogue” text facing outward). Use the included clamp and allen screw to tighten the grip to the bar (about 3–5 Nm).3. Install Throttle-Side Assembly: Remove your stock throttle tube. Select the correct ODI throttle cam for your bike. Snap the cam onto the ODI throttle tube and feed the throttle cables into the correct grooves. Reinstall the throttle housing and check for free throttle return before tightening completely.Installing Handguards/Sliders with ODI Grips:- Do not cut off the entire grip end. Instead, use a sharp utility knife or X-Acto to carefully score and remove only the inner plastic plug to make room for bar-end hardware.- Slide the grips onto the handlebar (throttle side only if clutch side handlebar have knurling).- With the grip fully seated, firmly tap the grip end against the bar end to punch out the cut plug.- Trim any excess material for a clean, flush fit with your handguard mounts.- Leave a small gap between the throttle tube and the bar end to prevent binding and ensure proper throttle return when mounting handguards.Tips for Best Fitment:- Don’t overtighten the clamp bolts, strip-outs happen fast with small threads.- Ensure there’s a small gap between the grip and the bar-end/controls to prevent friction.- Double-check your throttle return, should snap back clean with no drag.

Super easy to install. I love ODI lock ons. Excellent fit and finish. High quality, comfortable grips. Make sure to check what cam you need for your bike, as the kit doesn’t come with every cam, just the most common ones.

These used to be my favorite BMX grips growing up, so I was stoked to put them on my DRZ-400. Same grip feel I remember, and I love the look. The end caps are super easy to punch out if you run hand protectors.

I have had a set of the Rogue pattern grips on my mtn bike for a while, finally got some for the dirt-bike.Love them just as much for the dirt-bike now. Installation is easier than 'glue-on' grips. The only slight complication is that in order to use bark-busters, you need to cut the end off (like on any grip). With these, there's an inner plastic tube you need to cut through. I used a dremel b/c my knife wasn't cutting it (ha ha). So, a tiny bit more effort to do that, but who cares really.Once they're on and locked down, they are perfect. I love the grippy compound. This particular pattern has nice big blocks that help to insulate my hands from the motor vibes (old 2-stroke KX250) which is the main reason I got these.I've done maybe 3 rides since installation, so not a lot, but I already know they're gonna be great b/c I don't think about them when riding. No slips/spins, lots of grip, good vibe-control (for what a grip is capable of).I won't even ding them for not having the right throttle-cam for my bike. They come with several cams, which already is pretty good b/c surely 99% of bikes are covered by that set. It just happens that my old bike is not one of them. Luckily, they make the right cam, its just sold separately... and its only a few bucks, so no biggie. I knew this before I bought the grips and ordered the cam at the same time. ODI could easily ship no cam and tell everyone 'order your special cam separately', but hey.. they send several cams right off the bat. Now I have possible spares for friends.

The grips are fine, but make sure to look up the cam that fits your bike. I have a Beta 350rr and the "N" cam is required for my bike, but it is not included, so I had to order it separately from the ODI website. The included cams are "B", "C", "D", "J", "K", and "M".

Easy to install and very comfortable , stable grip.

I love these grips. I will NEVER glue grips on again for the rest of my life, and ODI makes the best clamp-on grips out there; they are tough, easy to install/remove (although I have yet to wear them out, so removal is not really a concern!), and come in a variety of sizes and styles. I use ODI grips on my ATC, my PWC, and now my motorcycle. This Rogue style is my favorite; aggressive, but very comfortable.I was a bit worried since they don't list my particular bike (2012 Husky TE310 4 stroke), but these came with 6 different Cams, so no worries; Cam A was a perfect match for the stock throttle cam.MC, ATV, PWC...Try ODI grips...I guarantee you will never go back to glue/wire.

Why did you pick this product vs others?:Nice lock on grips. I had to buy different cam to make work for the bike I installed it on.