Luxton Memory Foam Ergonomic Kneeling Chair - Posture Support Comfortable Padded Office Desk Chair - Angled Rocking Stool & Balancing Seat - Natural Relief for Neck or Back Pain

This chair is awesome! It’s like nothing else, so don’t compare it and keep an open mind. I love rocking on it while I work. I hate that I work at a job where I need to sit at my desk all day and this chair makes life great. It takes a bit of time to get used to it, but once you do it’s so great! Easy to assemble, light enough to carry to work.

A direct comparison to:https://www.amazon.com/dp/B06XXPQN4B?pd_rd_i=B06XXPQN4B&pf_rd_p=7672bfb7-93b0-4322-b745-2104db09c4df&pf_rd_r=10H7VG5TMZPGSMCB0W4S&pd_rd_wg=Sai5M&pd_rd_w=jajG7&pd_rd_r=bfd1a240-8b13-41fa-a7e1-e005774cdbe4Expensive chair ($350ish)Cheap chair (this chair - $140ish)I bought this and the more expensive kneeling chair at the same time and made a direct comparison. Here are my findings.Wood:The expensive chair has thicker wood. The cheaper chair's wood is the same width, but about 2/3 the height thickness, suggesting it would support less weight or wear out more quickly.Padding:Expensive chair has thinner, but denser padding. Cheap chair has almost excessively thick padding that quickly flattens out as soon as you sit on it. My main concern is that the padding on the cheap chair will go completely flat after a year or so. Only time will tell.Fabric:Material on both chairs seems to be reasonable quality and not likely to rip or pop seams any time soon, but the fabric on the more expensive chair is rougher and a bit abrasive on bare skin after sitting for a while.Support bars:The expensive chair has a single support bar in the back but is surprisingly sturdy. I thought the knee supports would be very wobbly but are actually sturdier than the cheap chair with the additional cross bars. I am very disappointed in the placement of the cross bars on the cheap chair because I sometimes pinch my toes under them as I rock. It seems like a no-brainer to avoid them, but when you are sitting in it all day working from home, it happens more often than you'd think. Additionally, the cross bars create more contact points with the floor which could cause problems on hard wood.Assembly:I encountered the same issue on either chair which is easily resolved. Don't tighten all the screws before you put the main seat on. Leave some wobble so you can set it on the pegs and guide the screws in more easily, otherwise it will be difficult. I had no other assembly issues. Most complaints about assembly are probably written by mechanically incompetent people. You really don't even need instructions to put these chairs together.Rocking Motion:The more expensive chair seems to have a wider and smoother rocking range. The cheaper chair tends to lean you forward a bit more keeping your center of gravity forward with more pressure on the knee supports. I hate to say it, but this single factor is what wins for me on the cheap chair since it is better for my back. The only way for people to really know what will be best for them is to try them.Other features:The angle of the seat and knee supports on the more expensive chair feel about perfect, whereas the cheaper chair's seat feels angled forward a bit too much putting extra pressure on your tailbone area. I suppose the angle adjustment would feel different from person to person though.The more expensive chair comes with adhesive felt strips to put under it for use on wood floors, where the cheap chair comes with nothing. While using the cheap chair, I rolled over a small pebble (something hard) which pressed and lodged itself into the chair's wood. Every time I rocked on it until I discovered and removed the pebble, I scratched and damaged my wood floor.On either chair you should tighten the screws periodically as they tend to come loose with use, but the cheap chair's screws seemed to come loose more quickly with the same use.The more expensive chair has a place to add an optional backrest (for $150 more), but the cheap chair does not.Neither chair has height adjustability, but either are adequate height for use at a normal height work desk. Some of the non-rocking chairs I have had are too tall when using wheels.Overall impressions:The expensive chair is superior in material quality and overall function in every way to the cheaper chair. The only question is, is that quality worth the additional $200+?

Everything arrived in perfect condition. All small parts items were furnished with 1 spare. Very strong, long-lasting construction. All wood pieces were made from furniture grade laminated plywood with no voids. Nowhere was cheap glued together sawdust used as with some other brands. All metal hardware screwed into threaded metal bushings. These fasteners will hold and NOT come loose like others that have screws into the wood itself. Cushions are made from memory foam, are thick and comfortable. One dimension that was not clear from the manufacturer's info was the total width of the knee cushions from outside edge to outside edge. This measures 19" and fits perfectly inside/under the leg opening of our roll top desk. In short, I could not be more pleased with every aspect of this item.

This chair is pretty good, but it hurts the knees when using the knee pad for extended periods. I feel that there are other styles that would work better. It is an improvement from a regular chair, though.

I used this off and on as a work at home office chair. It probably got about 2 hours of sit time a day for 3 years.Was pretty good since buying it.Every few months a screw would get loose, and I would re tighten it. No big deal.Today, I sat on it and heard a crack, and the wood has separated making it unsafe to sit on.I don't think 3 years is a good lifetime for a chair so 1 star.

Ergonomically this seems to fit perfect. Its really nice to have the ability to rock back and forth to get slightly different positions throughout the day. The split pads make it much easier to get in and out and adjust position over the type that is more static or with wheeled bases. ( I had a wheeled based one before). I thought not having wheels would be an issue with finding good positioning, but not at all.I'm 6'4" ~ 195-205 lbs (depending), and the only remaining question mark would be the durability. Its very light weight wood, and I have some concerns over the longevity of the chair after some time with it. It does have some flex, and depending on how well you secured the bolts in assembly may cause some creaking noises. After some tightening it seems gone, but there is still more flex in the wood than I feel confident about, but so far so good tbh.Very nice chair, and great ergonomic choice over the wheeled or non rocking versions. Lots of flexibility with positions and finally its very comfortable over an extended work day. Chairs I have had before are uncomfortable on the shins and knees, or the seat is at such an angle that the butt goes numb after a time. Not with this chair! Well-done!

I was very happy with the product at the beginning, great posture changes, but if you use the chair on a daily basis, the wood connections are not holding up, foam is too soft, and fabric not strong enough. The chin cushions are held with a single screw (and two small dowels), that's not enough.