Openii Raspberry Pi Power Switch,USB C Male to Female Type C Extension Cable Inline On/Off Switch for Raspberry Pi 4 An-droid(Only for charge)

I bought this for my Numskull Power Idolz wireless charging dock, as I didn't want it lit up 24/7 when I wasn't using it, and it works a treat. Now when I'm not using it, I can just switch it off, or when my phone's full, and then just leave it sat there instead of it overcharging constantly. It seems to be very well made, and the switch feels like it's really good quality.

I would give this zero stars if I could. It simply does not work. No power at all coming through no matter what I did. I have taken it apart and the problem is that the negative lead is not connected. The positive which goes through the switch is fine, but negative is not. I have tested this with a multimeter. It seems to me they have a QA problem here. Do not waste your money on the random chance you may get a working one, it's a roll of the dice.

Works really well. Got an HDMI transmitter/receiver that I didn't want to have powered up all the time. Fitted this switch to it and now I can turn it on and off without unplugging anything with ease.

I ordered this to use with the Raspberry Pi4B that I use to run OctoPrint on my 3D printer. It's well constructed and has a very positive click to the switch action, so I'm expecting it to last a good while. There are no low voltage warnings, so I guess the wiring must be chunky enough to get the job done. Highly recommended.

Plugs in one end of C type cable, other into Raspberry Pi or what ever you want to power. Click in, power. Click off, no power. Great!

Works fine with lower power PSUs and some phone charger but simply didn't work at all for 27w raspberry pi5 and similar higher powered apple and Huawei PSUs. Yes, I'm aware that there's a hardware on/off button on the Pi board itself but that requires constant provision of low power and running a status LED and I wanted an inline switch to avoid that.

Works as advertised with the RPi 4 (with twin cable 5V only PSU) and naively, I thought it would work with the RPi5, but it doesn't (certainly with the multi-voltage spec'd recommended RPi5 power supply). I don't think there's an inline switch that works with the RPi5.

Don't buy it looks ok but just didn't work from the packet. Hope this would have resolved an issue with a powered USB Hub but just didn't work, would have been a great option.

pratique. rien à redire.

Does not work with a raspberry pi 5 !

O aspeto não é muito bom mas tem estado a funcionar perfeitamente há já bastante tempo. Eu utilizo-o para desligar um Raspberry Pi 4B (com uma instalação de Volumio) após fazer "shutdown" e é muito útil para não ter que desligar o Raspberry "na ficha" (o que, muito provávelmente, já me teria causado problemas por demasiado desgaste da ficha, que não é desenhada para muitos ciclos de conexão/desconexão)

This switch works only if you have a wall adapter with a usb-c lead or a usb-a to usb-c cable going to the switch. If you plan on using usb-c to usb-c connection with this cable in between, this just won't work. I guess this would be due to the fact that the Power delivery handshake doesn't occur when using this cable. I suspect this would be due to the fact that only the +5V and GND are connected through this switch and all other data lines are blocked.

Funktioniert anscheinend nicht mit dem Raspberry Pi 5 da ein PD Netzteil verwendet wird (Kommunikation zwischen Netzteil und Raspberry Pi anscheinend nicht möglich über dieses Kabel). Es passiert nichts beim Schalten. Trotzdem 5* da es für andere Zwecke gut funktionieren würde.