Sabrent USB 3.2 Type-C Tool-Free Enclosure for M.2 PCIe NVMe and SATA SSDs (EC-SNVE)

This feels like a well made product. The top of the case appears to be aluminum metal but the bottom tray is plastic. The tray is hinged at one end and can be opened like a clamshell at the other end. The star ratings for this product do not relate to the intended purpose of what this adapter does. The three star ratings are for Capacity, For gaming, and Easy to Install. The first two have nothing to do with what this product does so be cautious of looking simply as star ratings. There is no capacity because it's a drive adapter and does not come with a drive. Also, I don't see how this could be used specifically for gaming other than transporting saved game files or install files This product is an M.2 Solid State Drive (SSD) ADAPTER. M.2 is a style of SSD that mounts directly to the motherboard of a computer. When not connected to a motherboard, you can't access the drive without an adapter such as this. The underside of the top lid has a kind of thermal tape which presumably transfers heat to the aluminum lid and is dispersed. While the top of the lid has grooves which "look" somewhat like heat fins, they are too small to really do anything. I mention all of this because this product can get quite warm to the touch. There are three screw options for different sized M.2 drives like the 42mm version. The adapter does come with a single screw for this type of mounting. Whar this product does not come with and which you may need is a USB C (female) to USB (Male) adapter. The product comes with an 8 inch USB C male to male cable. Without the aforementioned adapter, you can't connect it to you PC unless you have a USB C port on your computer. One thing you want to be careful of is not to try to open the adapter while the USB C cable is attached. When the cable is attached, it blocks the hinge from rotating and you could damage the cable or the female connector inside the adapter. I would not use this as a portable drive as it gets too hot for my liking and there are far better options for this. The reason I bought it is that my M.2 drive that was my C drive on my PC became damaged and would not load windows. There were files on that drive that I wanted to retrieve so this adapter basically turned it into a large USB drive and I was able to get then without issue. Hope that helps. This product did what it said and overall I am happy with its performance.

First and foremost, it works as advertised! Just plug an M2 SSD in, close the door, connect to computer, use windows Disk Management tool, configure the SSD, DONE. Afterwards, it shows as an external drive. It's got an external aluminum body which makes it sturdy and works as a heat sink. As such, it gets warm to the touch which is to be expected. It's about 4-5/8" (11.7 cm) long and 1-1/4" (3.2 cm) width and 1/2" (1.2 cm) thick, so it's very small and portable, and so MUCH more convenient than a common USB memory stick. It comes with a small USB-C to USB-C cable. Tested on my HP laptop with USB 3, I get 523 MB/s sequential read speed 192 MB/s write. This of course depends on so many things that it's only useful to show that it works fast. Your conditions can be much better or much worse. Be sure to use a USB 3 port for maximum speed.

My Alienware laptop had a pretty small SSD hard drive. Realizing that it had two slots available, I bought a Crucial P310 2TB SSD to install for more storage. Well, the joke was on me, because Dell split the 512 GB drive supposedly installed in the system into two 256 GB drives. Probably to save money. That meant I had no expansion slot. Enter the Sabrent USB 3.2 Type-C Tool-Free Enclosure for M.2 PCIe NVMe to the rescue. With it, I was able to connect the new SSD and use the EaseUS Disk Copy Pro utility to perform a sector-by-sector copy of the boot partition to the new SSD. The whole process, from unboxing to snapping the new drive into the laptop, took maybe 25 minutes. The laptop booted perfect on the new drive, and you'd never know anything was changed. The best part of all is that I still have a second SSD slot if I need even more storage someday. I almost didn't go with this model, as I had just the previous day requested to return a SABRENT Enclosure 3.5” Internal SATA Hard Drives (EC-KSL3), as it had been freezing up on me. But this Sabrent Enclosure for M.2 PCIe NVMe and SATA SSDs (EC-SNVE) worked like a charm. Super easy to use, no problems at all, fast, cool, quiet. I would most definitely buy it again.

طلبت المنتج كما في الاعلان وتم ارسال منتج بديل بدون علامة تجارية وقمت بارجاعه

Boitier de bonne qualitée et débit bien suppérieurà une clé USB. Multi-boot avec Ventoy devient un vrai plaisirs.

I recently purchased the SABRENT USB 3.2 10Gbps Type C Tool Free Enclosure as a way to keep my additional NVMe as a compact and fast storage device, and I couldn't be happier with my purchase. The tool-free design made it incredibly easy to set up and the transfer speeds are incredibly fast thanks to the USB 3.2 10Gbps technology. The compact size also makes it incredibly portable, perfect for taking my additional storage with me on the go. I highly recommend this product to anyone in need of a high-quality and reliable external storage solution. Thank you SABRENT for creating such a fantastic product!

Fungerade felfritt! Använt för att flasha NVMe M.2 disk till home assistant. Tänker att jag köper en till disk och har den som en extra hårddisk framöver.

Very fast and cool. I have experienced no issues with the enclosure. Easy to install the card and easy to use. I especially liked the design with the flip up lid to access the enclosure. This means that the case is able to have good contact between the drive and the thermal pad to allow heat transfer. Other cases with slide on covers will not be able to get good contact leading to potential overheating. (One of the main reasons I went with this product over others)