⚡ Connect at the speed of now — don’t let your network lag behind!
The Dell Force10 100G DAC-Q28-100G-0.5M is a passive direct attach copper twinax cable delivering ultra-high 100GBASE-CR4 speeds over a compact 0.5-meter length. Designed for QSFP28 to QSFP28 connections, it’s optimized for short-range, high-performance data links within and between racks. Each cable undergoes rigorous TDR and VNA testing plus individual switch validation, ensuring premium signal integrity and plug-and-play reliability for demanding enterprise networks.
M**.
perfect every time !
These cables have always worked flawlessly every time I have purchased one. The length is correct as stated in the listing, the quality is flawless and the price is PERFECT. I will continue to purchase from this seller. Thank you !
S**N
Quality product.
Works great in our Juiper MX204 devices. No issues. Quality built.
A**R
Works with mellanox at 100G.
Connected two CX-4 100G cards and a CX-4 to a Nvidia BF3 no problem.
M**T
Good cable, works, a bit stiff
Works perfectly between a Juniper router and Arista switch, when a competitor’s wasn’t even properly recognized. We have a pair of these cables running a 200Gbps link aggregation between the two devicesDressing this neatly is a bear because it is so thick and stiff, but that’s par for the course with DACs, especially at these speeds. They stick too far out of the front of the device with a bend radius that just won’t work with most cable management designed with Cat6A and fiber in mind.There’s always 100GBase-SR4 at 4x the price if it’s that a big deal. You buy DACs because they’re cheap, fast, and low power, not because they’re pretty. This one passes our tests for all three.
N**B
Works well on 40bgbe NIC
Runs well on Connectx-3 40gbe cards. unsure of 100GbE speeds, but likely fine
D**4
Worked as described.
Used to connect Cisco 6454 FIs to a pair of Nexus 93180s. Literally did nothing but replace the existing 40Gb cables with these and now we have 100Gb links where I previously had 40Gb. I have a ton of 10GTek cables in my datacenter and will continue to use the brand whenever I can.
O**A
It works
Connect the cable between 2 Mellanox 40GbE cards and it works.
S**E
Works Perfect with Mellanox 40GbE Cards
This cable was priced very competitively and worked exactly as intended. I used this cable to connect two Mellanox 40GbE cards in a Windows Sever 2016 Failover cluster. Each sever showed a link within moments of physically connecting the cable and I haven't had any disconnects. I am very happy with the cable and highly recommend it.
Trustpilot
Hace 2 meses
Hace 2 semanas
