Anker USB-C and USB 3.0 SD Card Reader, PowerExpand+ 2-in-1 Memory Card Reader with Dual Connectors, for SDXC, SDHC, (Micro) SD, MMC, RS-MMC, Micro SDXC, Micro SDHC, and UHS-I

I appreciate this adapter's versatility, and find that it works really well for my camera SD & microSD cards. It's a good, portable size, bit bigger than a standard memory stick; I could probably throw it in some of my camera pouches and cases if I wanted. P.S. a way to remember which side is which: USB-A is closest to the "A" in Anker!

I had a trip to Vegas and didn't want to use up my phones internal storage, and wanted a way to keep photos on a separate storage medium in case of a phone mishap. Bought a micro SD card from Samsung, and it worked seamlessly. Was able to transfer 4k videos and photos over rather quickly and nest part is, the device has a USB plug side, so when I want to transfer it to a computer or standalone hard drive, I have options to transfer off the memory card. It is plastic, which isn't a deal breaker to me. I saw some people mentioning that the caps on the ends could be lost since they aren't attached to the device. I have not had this issue, the caps fit on very snuggly. I went through 4 flights with it in my book bag, neither cap came off.

Another great product from Anker. Works great no problems downloading to the card reader and transferring it to my computer. I would highly recommend it good value for your money.

It could use better directions but you'll figure it out. It's fast works well . So thankful to finally have found something for my Android I had to go to my files on my phone then copy them, go to the usb ,I created folders then I would copy the photos . This may be helpful to someone. I'm not an expert but I figured how to work with it on my phone . Great deal

been reliable for the past 2 months i’ve had it. i use it a lot to transfer games and flash softwares and it’s held up fine. transferred 40 gbs of files one time and it held up, only a bit of heat got to the reader. has stable 20-30 mbps speed, but for $20, it’s a bit expensive for what it does

I love the clean, simple design and dual plugs (USB-A & C). The fact that it reads both SD and microSD cards. Also the fact that it’s much faster than my decade old card reader. Not sure why I didn’t purchase one sooner. It makes transferring RAW images to my MacBook much easier.

Perfect for watching videos on my micro sd card on my iPad.

Works great, thank you! Delivered in a very timely manner as well.

Love the size and the caps on each end. Feels sturdy and works well.

Article conforme à la description.

Type: Dual-connector SD/microSD card reader Connectors: USB-C + USB-A (3.0) Card Support: SDXC, SDHC, SD, MMC, RS-MMC, microSDXC, microSD, microSDHC, UHS-I Speed: Up to 104MB/s transfer rate Use Case: DSLR rigs, dash cam footage, Raspberry Pi, laptop-to-phone transfers, festival content dumps 💥 Why It Deserves Big Compliments This reader is a proper plug-and-play powerhouse. With dual connectors—USB-C on one end and USB-A on the other—it’s ready for modern laptops, older PCs, tablets, and even phones. No adapters, no faff. Just plug in and go. The dual card slots let you read SD and microSD simultaneously, so you can copy, transfer, or back up without constant swapping. It’s compact enough to live in your glove box or camera bag, and the aluminium casing adds durability without bulk. Whether you're offloading footage from a GoPro, transferring site photos from a DSLR, or backing up festival clips from a drone, this reader delivers fast, reliable performance with zero drama. ✅ Big Wins Dual connectors—USB-C + USB-A = full device coverage Simultaneous card access—SD + microSD at once Fast transfer speeds—up to 104MB/s Plug-and-play—no drivers, no setup Compact and durable—aluminium shell, pocket-sized Wide compatibility—MacBook, iPad Pro, Galaxy, Raspberry Pi, DSLR, dash cam Amazon rating: 4.6 stars from 2,700+ reviews1 ⚠️ Minor Trade-Offs UHS-I only—not compatible with UHS-II speeds No write protection switch—manual card safety No LED indicator—no visual feedback during transfer MicroSD orientation is reversed—minor quirk2 Caps may differ in colour from body—purely cosmetic1 🧍‍♂️ Personal Verdict Used this with a DSLR and Raspberry Pi 5—tight fit, fast transfer, and no compatibility issues. For under £20, it’s a proper card reader that handles real-world content without the faff. If you want one reader for all your gear, this is the one to grab.

So ziemlich das beste SD-Lesegerät was ich je hatte. Viele haben noch irgendwelchen Firlefanz, wie CF mit an Bord, was man heutzutage fast nicht mehr benötigt. Hier wird sich auf nötiges beschränkt, aber ist trotzdem vielseitig unterwegs. USB A und USB C als häufigste Schnittstellen sind abgedeckt, SD und Micro-SD als häufigste Kartentypen ebenfalls. Der Leser fühlt sich sehr wertig und robust an. Die Abdeckkappen sitzen stramm und gehen somit nicht ungewollt verloren. Die Stecker sitzen gut in den zugehörigen Geräten. Geschwindigkeit ist top, und vermutlich eher durch die karten als durch den Leser beschränkt. Aufgrund der Größe kann man das Teil überall hin mitnehmen, aber den Hosentascheneinsatz würde ich so dennoch überdenken. Für die Kartenslots gibt es keine Abdeckung als Staubschutz. Hier sollte man sich bei bedarf noch Blindstecker zulegen, oder wenn zur Hand - drucken lassen.

ottimo, ben fatto