Kitchen Sink Mixer Tap with Pull Out Sprayer Chrome, 2 Spray Modes Hot and Cold Mixer Tap for Kitchen Sink Single Handle Faucets

I wish my old tap was like this! took an hour trying to get the old one out, 10 minutes putting this in. It's very thoughtfully designed. 1) The threaded shaft is nice and long - perfect for my counter top as it's quite deep so there's plenty of thread. (old tap barely fitted) 2) The nut to tighten it underneath has a cut away - so you can simply slide it over the pipes! (my old tap didn't, and it was near impossible trying to slide the nut past everything down all the tubes). 3) The nut also has 2 tightener screws - this was awesome, can't get a spanner in the tight space, and with old tap it always worked loose because I couldn't properly tighten, with this one I can finger tighten first, then just use screwdriver to fully grip, nice design! 4) Tap operation nice and solid. Nice and tight tap movement, feels very solid. 5) Ball joint on the tap end bit - this is actually going to be useful not only in that you can angle it obviously, but wear and tear - old tap has died here basically, because from moving constantly it obviously is a weak point. But this ball joint on this means there's no bending of the tube at the joint. 6) Spray nice and narrow - didn't think much of this before, but it's quite useful as it helps blast away stuff on plates instead of sprinkling it like a shower. 7) nice rocker switch on the tap end - better than a push button as it's more instantly obvious which mode you are in. (note, it doesn't feel great uninstalled as there's no pressure - once there's pressure, the switch rocks nicely) 8) good instructions and guide marks - like, the pipe has a 'add weight here' - nice! old tap didn't and was a bit of adjustments to find the best place - this, right place first time. The weight is nicely weighted too - old tap wasn't and used to get stuck, this has just enough weight to pull it back, but not too much so it's a pain to pull out. Overall, very pleased!

Really good tap Smooth to use Easy to install

I would say the tap is good. It was once we changed the fittings on the pipes ok to fit. We did have the wrong fixing but that was an us problem not a tap issue. The pull down mixer has a weight on it and this was getting trapped between the hot and cold pipe due to how our pipe work is set up. We overcame that with a cable tie which keeps the weight from dropping behind. The spray does go a bit everywhere so im guessing i won't use that much. The tap is light compared to the previous one we had. You can get a kettle under to fill So I'd say it's a good size. So far the tap seems good it does what it is supposed to and looks good.

Has been installed over a month now with no problems a great value for money replacement tap

Fantastic product and well made, European size connection is needed other than that fantastic

Tap looks great and works great for cold water but it’s useless with hot water on our gravity fed system so we’ll need to replace it asap. Bit annoying as there’s nothing on the specification which states minimum pressure.

Looks fab but both leak. Thought maybe the first one we bought was an installer error for leaking. Bought a second one to match the kitchen......now they both leak out of the handle.

Cannot recommend this enough. Similar but much less attractive options were available through our kitchen supplier for literally hundreds of pounds. This saved us a lot of money and the functionality is fantastic. Cant comment on the fitting as we paid someone to do it but he didn’t complain! Love that it just looks like a normal tap from afar instead of obviously being a hose tap, but I really couldn’t be without this for how much easier and effective it makes rinsing. The stainless steel is also really robust and easy to keep clean.