Garbage fighter Tires for IROBOT ROOMBA Wheels Series 500, 600, 700, 800 and 900, e5, e6, i7,Anti-Slip, Great Adhesion and Easy Assembly, Wheel Replacement for All roomba Models (Black 4 Pack)

Wow! I have a 2019 Roomba and it has been working well, but needed some updates. I replaced the battery and then noticed the vacuum was having some difficulty going from my linoleum flooring to our hardwood. I never thought about the wheels or the treads. I had one that was completely bald! I considered replacing the wheel units, but wondered if it was necessary. For less than $4 I decided to try these. WOW! WOW! WOW! My Roomba flies around like crazy now, no problem. It’s the only time I’ve purchased a part that was not made by Roomba, but if your wheels needs their treads back….this is the best fix at a very reasonable cost! (It took a little elbow grease to remove the rubber treads in the wheels, but very easy to replace)

Fit like a glove to my very old roomba 808 model! Had to scrape off old left-over thread-less original tires off with a knife. But these were super easy to install. Tip: make sure to pop off the wheels off the axels and clean all the hair out on the inside. It’s a treasure trove of junk inside! I’d never know! So now roomba running fast and accurately! And battery lasting longer, due to not needing as much energy to drag those wheels full of hair and debris!

Snapped right on with a bit of effort now my Rumba can’t be stopped.

Putting the tires on was tricky, but more tricky was getting the spring attached back. I used a thread to pull it back into place. Took maybe 30 mins overall but works brilliantly for s9+. It has stopped docking and would get stuck when returning to station with wheels rotating but replacing the tire fixed it.

The media could not be loaded. Beware "e series" Roomba owners.These tires fit, BUT removing the worn out tires from the unit is hard. They are placed on with adhesive and locked in with inserts into the wheel.I managed to remove them by peeling them off and cutting the rubber dots that were inserted in the wheel. It was hassle, but better than paying $35+ for each wheel module (left and right)

My Roomba is my best friend for keeping the floors clean. These tire replacements arrived quick, packaged well and were a perfect replacement to keep my friend working. Easy to install and I will re-order when needed.

Wheels on my J7+ were worn out, and since iRobot didn't have the replacement parts in stock, thought I'd give this a try. Glad I did, as I saved myself about $60.Between taking apart the J7+ bottom, removing the old wheels and installing the replacements, the entire process took maybe 10 minutes. The original wheels were easily removed with a utility knife. No need to waste time prying a screwdriver under them to try to get them free. Just slice and peel. The original wheels had rubber tabs that sunk into the plastic, but they snapped right off as I peeled the wheels away, and the broken tabs disappear into the plastic, and in no way inhibit installing the new wheels. The new wheels need to be pushed on to sit flush with the plastic, but that takes seconds.I added a few minutes more to the process by completely cleaning underneath the bottom lid that needs to be removed. That was an eye-opener. TONS of dirt, dust and hair accumulate throughout the machine that is otherwise invisible to the naked eye with the lid attached.

This was the missing piece I needed for my Roomba to work again super easy to install.