Dust Separator with 6 Gallon Poly Tank, 99.5% Efficiency Cyclone Dust Collector, High-Performance Cycle Powder Collector Filter, DXVCS002, Yellow

I'm a contractor and do pretty much everything and forever now we have been using rigid vacuums and we are always buying new bags and new filters to protect our clients houses and to keep dust to a minimum which also helps keep clean up to a minimum and for the last 6 years we go to Home Depot and spend 30 plus dollars on a two pack of bags and probably replace the filter every six bags that we use but not anymore not only do we not buy bags and filters anymore but we also don't lose suction power because as the bags in the filters get full and dirty you lose suction power little by little but with this thing I would say about 95% of everything that we suck up goes into the Cyclone device which leaves a very small amount that goes into the actual vacuum and with that working so well we have actually stopped buying the bags and stopped mine filters all we do is bang out the filter maybe once every two weeks and like I said we don't even buy bags anymore because the amount that goes into the vacuum is so small it's not even necessary you just got to have a good filter but most importantly the suction power doesn't change I can fill up that DeWalt separator container about 60% before I ever have to empty it and also you can literally suck up water and it goes in there you can suck up dirt rocks everything and anything I mean we have literally done Plumbing work outside where we've had the dig holes and cut live lines and I've used it to suck not only the water but the dirt the mud and the rocks and everything goes into the separator before it goes into the vacuum and it also makes it easier to clean all you do is take off the top piece and dump out the little yellow DeWalt container and hose it out but the fact that I can pick up anything I want now is amazing we used to demo bathrooms and we would sweep up a lot of the stuff and again we'd have to go through bags and filters and eventually we would lose suction power but not anymore I am able to suck up anything I want as long as it fits through the two and a half inch hose I am all good not to mention I've shown other contractors like our floor removal guys and not only did they fall in love with it but they bought about five of them the day after I let them use ours because they use these angle grinders with these resurfacing tools and they have vacuums attached to it and if anyone's ever seen them they make so much dust and they would go through bags and filters and the vacuum would work beautifully to suck up the dust from there angle grinder with the circuit resurfacing tool for about 1 minute it would suck up dust after that the whole house would be a cloud of smoke so I had them try it out because I knew how good the tool worked they laughed at me and told me that they didn't even want to try it so I talked to their boss and their boss knows me and knows that I buy every tool in the world so he told them to give it a shot the guy literally within 5 minutes of using it so he told his boss it was amazing which I already knew that because he wasn't in a big cloud of smoke I could actually see him using it so like I said they bought a whole handful of them and now they use them on every job but again the most important part is you do not lose any suction power and you can suck up anything in the vacuum stay strong the only thing you need to remember is you need to have a good hose because it keeps your vacuum so strong that I have actually had hoses collapse because the power is so strong so that's the number one thing have good stiff hoses that aren't going to collapse on you and you will love this thing if you do anything like I do another cool thing about it is because it's a whole separate thing there are numerous times where I will have the vacuum outside of the room I'm working in I use the big orange rigid hoses which are about 6 to 8 ft long and I will have the vacuum outside of the bathroom and have the hose in the bathroom with me with the DeWalt separator which obviously makes no noise so I don't have to deal with the loud noise of the vacuum and the vacuum is still right next to me sucking everything up now on that same note when I don't need to benefit from it being separated like that in two different rooms which is honestly amazing and great I do have a piece of Romex that I use to pretty much tie the two together so if I am in one room when I pull on the hose they both pull together otherwise I have had a few times where all Yank on the hose and if my rigid vacuum wheels don't move very well like Unfortunately they don't move very well I've had the hoses unconnect so I came up with a little rig job where I have taken a piece of scrap Romex and pretty much just tied one handle to the other handle so now when I pull the vacuum hose they both come together but that's only something I do sometimes but either way I use it all the time for sanding I'll hook my orbital sander up and connect it to the vacuum and all the dust from anything that I sand goes into the extractor and not in the vacuum and I still have max power on my suction so definitely check it out guys for the price I promise you you won't regret it just in one month it's paid for itself just saving me money on the rigid vacuum bags and filters that I had been buying for years so I wish I bought this a long time ago what really turns me on to it was I got a buddy of mine that owns a wood making shop and when I saw his huge dust extractor I started looking into it and I love to walk tools so when I saw this I just had to buy it and also the wheels on the DeWalt extractor move super super easy they are great Wheels so hopefully you guys enjoy it as much as I do and I never do reviews by the way never ever ever but I had to do a review on this because me and all my guys and everybody that ever sees it absolutely love it just like the demo flooring guys we've been using them for over a year now and every time they come to a job for us he bust out all of his extractors with his rigid vacuums and always always gives me a handshake and a hug and says thank you for introducing this to him because he also agrees that not only has it saved him money but it's also made him look much more professional and has kept customers' homes much cleaner when they are using their angle grinders and the resurfacing disc where they are literally grinding off the top layer of thinset or glue or whatever on the foundation of the client's home

Leaves my vacuum clean. I matched this with a Dewalt 16 gal vacuum and I was pleasantly surprised to find no dust in my vacuum and everything in the dust separator. This means less filter replacement. Great to keep cost down and less cleaning.

Purchased this a year ago. So far, one of the best additions to my garage workshop. I struggled with filter cleaning for years until I came across these things (dust separators). I am super pleased with the results. It is impressive how simple it is yet how effective they are. I went from frequently cleaning the filter, to never, without the loss of suction. Now, after a year of use, I would definitely recommend a dust separator to anyone who cuts plenty of wood. At just over 100, it's a relatively inexpensive fix to a problem with dust collection.

This works pretty well. I was doing some drywall repair in my living room and didn't want a bunch of dust settling on everything in the house. The product looks a bit like a shop vac, but has a centrifugal particle separator on the top. Hook one end to a GOOD shop vac, hook the other to the output side of your sander or dust-producing device, and the vacuum pulls the particles into the top of the separator, making the heavier particles fall harmlessly into the collection bin. It isn't a perfect solution, since you still have a lot of dust not pulled into the sander or saw, but it cuts down at least 75%-90% of the dust you would normally have to clean up anyway. In fact, the only downside is that now you have another big plastic shop-vac thing to store when you are done. But my neighbors fell in love with this, so it is currently being loaned out, so I don't expect storage to be a problem. My neighbor says that it cuts down nearly 100 percent of the sawdust from his table saw.

Bought this for a friend who always helps me out building wood projects . He lives in an area that gets hit with sand storms a bit too often and tries to keep his back porch area clean of sand. He told me it used to take him about four hours with his old vacuum being it would get clocked and need to be emptied and filter be cleaned so often. This has helped home cut the time in half. I have many other versions of the dust deputy in my garage, one for a large dust collector and another for a wall mounted auto vacuum system. Very good products and I see myself always having them. They are great with drywall dust too.

This thing is awesome. I wish I would of found one of these earlier. I was digging a deep hole and using wet dry vac to help get the dirt out of the hole. I was so surprised at how well this thing works as only a small thimble of dirt actually in my wet dry vac. such a good investment for the cost. It is small, but honestly wouldn't want anything much bigger as this is still easy to move around.

Separates out all of my metal grinding dust and small fragments very nicely. The shop vac filter and basin is staying surprisingly clean, it is separating even finer dust than I expected! Please note that depending on your shop vacuum’s hose diameter you may need an adapter or another hose to hook them together. I found suitable ones here on Amazon.

Best investment we have made this year! My husband planes wood for his projects and it is fabulous for keeping the sawdust down. 👍❤️ Works great and is easy to use and set up.