QWORKSpray Gun, Aluminum Pneumatic Air Engine Cleaning Washer Gun Kit Tool, 1/4"

unusual fitting sizes but you can use and adapter and it will work great. use at work cleaning engine bays https://www.amazon.com/dp/B09CDD6Z8S?ref=ppx_yo2ov_dt_b_product_details&th=1

Let me start by saying that this item is awful, from initial inspection the quality is inferior, lightweight metal (maybe) improperly threaded fittings, the unit did not work a single time, the air fitting that came on it was non standard and it took me a month to have one ordered in. By the time I got the fitting for the non standard threads it uses, I put if together, and found the fitting for the suction intake was threaded in a way that the intake lossened up and could not create suction. This is a tool that if you saw it in person, you would laugh at it. It is hard to believe they can get away with selling this junk in the first place. Many regreats for this purchase

Muy buena calidad

Air hose connector is not standard to U.S., China maybe

What a waste of my time. Fitting is garbage and can not be converted to normal 1/4mpt. Hose falls off without any effort. Built like a childs toy instead of a industrial tool. Stuff like this shouldn't even be allowed to be sold online. Garbage.

To connect a standard air fitting, it needs a thread adapter "M10x1 male to 1/4-inch NPT female", as shown in the photo.I use this spray gun to apply Corroseal to the undercarriage parts of a car, for rust mitigation. Set the air compressor regulator to about 40 PSI. Too much air will cause the coating to be too thin. Hold the container of Corroseal above the spray gun, so you have gravity to assist the spray gun suction.Sometime I will try coating the inside of a trailer frame with this method, but increase the air pressure to push the Corroseal further into the steel tubing of the trailer.

Great siphon gun for sucking things clean or for pulling up solvent to wash parts off with.

The spare hose fitting the one I Ned it’s to small