AIM SportsMosin Nagant 1-Inch Extended Recoil Buttpad

Fit my original m91 with original screws nearly perfectly. In the image the only modification made was me loosely drilling out the holes for some more sponginess, and I will be cleaning them up a bit. I was going to boil the rubber and soak it in oil to loosen it up, but after shouldering the gun in this state, decided that was not necessary. A noticeable improvement in comfort and extremely easy to install.The only downside is the strong tireshop smell, but it is a solid chunk of rubber so that should be expected.

I have come to call my mosin nagant "The shoulder buster" and for good reason. Usually 20 rounds leaves me black and blue for a week after shooting it so I knew I needed some padding.First off the install was a breeze, 2 screws and your done. The instructions made me laugh a bit when it suggested using my hands to bend the rubber butt pad. This thing is pretty thick and solid rubber there's no way I could bend it any noticeable amount. I did place one end on the floor and used some leverage to bend it just enough.I haven't been able to shoot with it yet so I can't comment on the actual main function. It does add length and feels a little more comfortable holding it now.The butt pad fit pretty well on my rifle, it certainly isn't 100% though. Knowing how old and how quick they must have pumped these rifles out they are all not going to be a direct copy of each other. The small differences across these rifles would make it impossible to get a perfect match for an add on part. That being said the fitment issues are very minor and could be solved by sanding or trimming the rubber pad a little bit. The fitment wasn't enough for me to knock a star off however, that's how minor it is.

Hello all, this recoil pad is a defined must have. The Mosin Nagant 7.62 X 54r round has a felt recoil of a O/U 12g shot gun with no recoil pad. So after 10-20 shot you shoulder will go numb.The pros:-Installs in 5 min, 2 screws.-Has a overall good "general" fit to my Mosin 91/30. I did have to bend mine a bit to make it fit the curvature of the rear stack but no big.-Adds about 1 to 1.5 inch to the length of pull, and that is a bonus since I found the stock to be a bit on the short side.-It is made of semi hard rubber so it should last a long time, only time will tell.- Reduces felt recoil, my 16 year old niece can now shoot it with out issue (at a rest, its to heavy for her to hold standing).The Cons:-The rubber pad will stick to your cloths, I had to taped the sides of the pad to fix this.-The fit is not exact. My pad seem to stick out both sides and the top of the stock about 1/16 or so on each side. And about 1/8 inch at the top. Not to much but it does cause the top to grab when I go to solder the gun. I find myself having to push the gun out then shoulder it.Over all I would say this is the best "mod" you can do to this rifle for the price. Made my rifle more enjoyable to shoot, and definitely allows female shooter to join in.*Note: on the seller of this product.I have did/do have an issue with the seller, I have taken this up with Amazon. But the product is great.I had ordered a new sling, well attempting to reach the seller is virtual impossible. I tried for 4 day. I have tried via Amazon nothing, I have tried via their web site(contact us) section, still no response. I did find a number and after holding for about an hour, I was told that the sling it in actuality on back order. Even though it shows to be in stock.Note: the "leave a message option will disconnect you from the systemEven better, the agent I spoke with was unable to tell me when they would be getting more in. Or when they would be placing an order to get more from their supplier.Thus I may not revive my sling (and you wont/may not get yours ether). Your mileage may vary but you can count on a very difficult time getting a hold of the customer service if anything goes wrong.

This is an excellent , and cheap, replacement for the steel butt-plate on your M44 if you're looking to reduce recoil. I took some advice from previous reviews and drilled out the holes on the butt-plate to make it a bit more pliable. As it comes, it's very hard, and while it would probably reduce felt recoil, drilling holes all the way through makes it a bit more giving.For a range test, I put 20 rounds of 202 grain soft point rounds through it, 10 rounds of 192 grain heavy ball FMJ, and 10 rounds of 150 grain FMJ through it. I noticed the reduction in recoil against my shoulder instantly, it felt more like I was firing a .308. Obviously changing the contact point from a steel plate to a rubber plate would help, but I was very impressed. Usually after 20 rounds of 7.62x54r I end up with a bruised shoulder, using this rubber recoil pad I had no discomfort.I myself didn't have an issue with the recoil from an M44 before using this, but every time I go out to the range with some friends or family they always refuse to fire my M44 after the first round because of the recoil. So I bought it more for them than myself, but given how much more comfortable it is to fire, I'm starting to like it too. Biggest advantage of that is now the people I go shooting with can use my cheap 7.62x54r ammunition instead of the more expensive stuff.