Color Enhancer Sealer for All-Natural Stone and Pavers. Marble, Travertine, Limestone, Granite, Slate, Concrete, Grout, Brick, Block. (1-Quart)

This amazing little product took my tiles, and I just installed on my backsplash in my kitchen from looking like a very chalky pale color to bringing out its natural array of Earth tones and took the chalkiness away. I only had a very small area to do so. I just brought bought the small sample size It worked fantastically, and it was exactly the amount that I needed. In the photo, the small piece of tile in the front is a extra piece i had left over that has not been sealed.You can see that its color is a lot paler than the color of the tile around it. The directions were easy to read and basically I painted the sealer on I did two coats.And the little bottle that I bought was perfect for covering the thirteen square feet that I had. I have just completed the backsplash, so I cannot say long term.How things will go?But for the time being, everything looks amazing.And I am very happy I believe this product needs to be reapplied occasionally.So I will end up buying the larger one in the future, but for the time being.This was what I needed, and it was perfect.Great value great product!

I used this on black slate flooring that was turning white. After a mild power wash and stripping the previous sealer, I applied this product and it worked great. The white is gone and the slate looks terrific. The black color is back. It’s rained a few times since and no white has returned, so the seal is effective and durable. It was easy to apply and really no smell I could detect. I’d highly recommend this product.

This is the perfect product to restore color and as a primer sealer on my outdoor Spanish terracotta floor tiles. I used 2 coats. Easy to apply using a spray bottle pump and spread with a cloth covered swiffer mop head. Doesn’t turn white or cloudy like other brands.

I purchased this product when I noticed that after using my conditioner after cleaning, the floor (natural slate) seemed to dull out within a day. In the past, after cleaning/conditioning it would stay bright for weeks. Realizing that I had not sealed my slate floors since I installed them almost 20 years ago, I guess they were due. However, the conditioner does put a form of sealer on the stone - but just not a 'permanent sealer' - as this product is. If you are also using a conditioner and then use this product for a more permanent sealer, please note that unlike the conditioner, which you can walk on as soon as it dries (20 minutes or so), this is a true sealer and took over 24 hours before it was totally dry. It may leave footprints and feel tacky if you walk on it sooner. Considering the cost and not seeing much difference after it was done (see before and after photos) I was happy for that - because I do remember when I originally sealed the floor we could not walk on it for quite some time, and it looked beautiful for years. The 'before' photo was taken after a very thorough cleaning (hand scrubbing the grout, etc), hence, the difference is minimal. Look at the front tiles in the 'after' photo and you should be able to see where I stopped applying the sealer for the day. It is hard to determine from the photos, but it does have a nice slightly 'wet look glow' to it - compared to the unsealed stone. It has been several weeks since I have done this part of the floor and I can say it is retaining its glow very well. I held off from continuing with the rest of the floor only because of some of the reviews that stated that the sealer actually put a haze on the stone (!!) after a week. So I held off to be sure that would not be the case. It has been several weeks and that did not occur. These types of sealers appear to be very sensitive as to what it is applied to the floor (i.e., sealers or other products) before applying this product. I believe that may be why some reviewers may have experienced the haze. I was happy that the product did not react with the conditioner that I use about 4-5 times a year. I used foam brushes to apply the product and that worked very well. The only issue that I had not anticipated is that you must lightly wipe off the residue about 10 minutes after application (I used new microfiber cloths). Since you only have so much working room, I found it difficult when applying since I knew I would need to be able to reach the area 10 minutes later for wiping. That, and you must not let the sealer dry before wiping off the excess made the work flow limiting and took several hours to do this small room (about 6x6). The good news is that although I bought the gallon container based on the coverage, I thought the product went a long way so I'm not worried about running out. Overall, I'm happy that my floors look like new again and I suspect keeping it clean will be easier for quite a few years.

I used this product on my covered slate patio. It looked great after applying, other than being slick to walk on. However, the color enhancement and protection wore off after rinsing the floor with water in the spring. The significant issue is that there were cloudy, white patches on the slate. I've used a pressure washer and various commercial stone cleaners to remove the milky look, but I couldn't get rid of it. I asked a professional stone mason to fix it, and he said that it's permanent - I can't do anything about it; the milky look is now part of the stone. The product may work on other types of stone, but don't use on natural slate.

👍👍 Satin to semi finish. I have bright undercounters and only the slightest glare off edges. Love the finish- slight darkening but the colors pop! fYI a little goes a very long way. Only used 1/2pint or so for 2 coats on 29.5ft X17in stagger stacked unfinished slate backsplash (I would load a bunch of picks but Sorry Amazon, I'm not giving you access to my phone and contacts while I'm not using the app to do so) Easy cleanup. Sugst, 1-2oz in your working container, dab with a goodold brush. Start with the ends and cracks. 2 coats for sure. Very watery but that is needed to absorb. No issues with removal in finished woodwork, Formica counter or Paint My #1issue with my slate backsplash has always been the dusty look at the cut edges, this 💯 fixes that!

This stuff work great we love the look

Absorbs quickly and there was very little pooling of sealer. Enhanced the colour nicely with no residue or shine once dry. Covered 300 square feet easily with a little left over.

had some dark blue concrete/ cement tiles put in the bathroom which started to go white and stained despite cleaning them regularly. in fact some of the cleaning products made it worse. i needed a product that would darken them back up as well as protect them. Easy to use and has done a brilliant job tiles are looking like when they were first laid. Very pleased with the result. Before and after pictures.

Restored my slate tiles that before looked like it had lime-scale buildup (but research taught me it was etching from improper cleaning). Product is Very easy to use. On a budget, so I ordered the sample bottle and was able to do the whole shower (applied with a soft bristle paint brush). Some spots could use a 2nd coat. I had before pics but couldn’t figure out how to add them here.

Worked as described. Had to darken grout considerably. Ended up applying 4 coats which gave me my desired tone. Very pleased