15854941 Engine Motor Mount Compatible with Fits 2007-2014 Tahoe Silverado Suburban Avalanche Sierra Yukon Escalade A5365HY 15854939, Right or Left 1PCS

Well built product been on my truck for a year and still going strong would recommend to anyone

Fit great, good quality!

Motors mounts and transmission mount seems to be decent quality. The long run will tell with that. Bolt hole in all the mount lined up and heat shield lined up perfectly.Not a guide, but sharing my experience.Transmission mount - Pretty easy to do. Take two nuts off bottom of the mount that's under the cross member. With a jack supporting the transfer case, take out two bolts on the upper portion of the mount to the transmission. Jack up transmission just enough to slip mount out. Reassemble in reverse order with new mount.Motor mounts - I opted to go through the wheel wells.Driver's side - I started with this side. Jacked up vehicle and placed on jack stands. Took front wheels off. Took wheel well liner off. Remove heat shield from exhaust manifold. Mark steering linkage and remove. Remove the 3 bottom bolts to the motor mount then raise engine up. Take off the 4 bolts that are securing the motor mount to the block. I had to bent old heat shield around a little so I could sneak it out of the engine bay. Installing the new one, I had to bend the new head shield a little in various ways to get it to slip in. Reassemble in reverse order of disassembly.Passenger side - fairly similar to driver side but a few key differences. I couldn't sneak it out. I had to take off the 2 nuts off and take the mounting plate off the motor mount on both the old and new motor mount to be able to get it in and out, and Reassemble the new one inside the engine bay. Getting the bolts back in was a pain in the butt on this side.Everyone's experience may be different, specially with many different set ups and approach of doing this. Make sure you have multiple length extensions and universal joints.Not a guide, just sharing my experience. Glad everything fit perfect alignment wise.Picture of old mount posted.

It works only problem are the heat shield getting it back in the vehicle. Heat shield made it difficult to put bolts back in and I had to cut the heat shield. Seem though it will hold up for a while.

Installed in my 09 tahoe and it was a perfect fit, really good quality product

Removed old engine to install new motor. Discovered the motor mounts were bad. This is exactly what I needed. Well built. Easy install

They fit and worked.

The left motor mount on my 2008 Avalanche broke when a car ran into my right front wheel. So I drove with a broken mount for a while. A year ago I replaced the engine in the Avalanche and replaced both motor mounts at that time. These mounts work as they are supposed to.