Entregar a Bolivia

Para la mejor experiencia Obtener la aplicación

Descargar la aplicación

Fuidamos elementos de

EAU
UK
India
EE.UU
Japón
KOREA

Servicios al cliente

Sobre nosotros

Soporte al cliente

daier24V 6S 40A 18650 Li-ion Lipolymer battery BMS PCB Balance for ebike ebicycle

Q: is there a specific order that wires need to be soldered to the board? Mains first then balanced leads for example?

Assuming the wires are not connected to anything on the other end (aka your battery holder is empty and you have no load or charger connected ) you should be fine with any order. I would recommend moving from one side of the board to the other so you don't concentrate too much heat in one place. Try not to unsolder the pads from the board by applying to much heat. Don't solder live wires!

Q: Where does the charging lead connect?

Not answering the question, but my BMS had the same issue! No voltage/current at P+/P- when everything else is wired up!

Q: can anyone tell me how to connect to the load? do I use p+ and p-?

Initially it was not clear to me where the charge and where the load connected. Other reviews clarified that the both the charger and the load connect to the P+ and P-. The BMS auto switches between input and output depending on the voltage on P+P-. I tested it on my Power wheels car and the full 20 plus volts were on the (P+P=) output terminals. With the charger connected for couple hours it raised the voltage from 3.6 to 3.8. One cell was at 4.0v . I will leave it on the charger overnight and see if it balances better. If you connect your load to B+B= , it will work but you will not have any load overcurrent or under voltage protection for your battery pack. You would be able to run your device till the battery is totally dead, which damages l-ion cells.

Q: Can I wire two of these in series to make a 12s?

Yes, you probably could, but just be aware of the fact that if the BMS is unhappy with the 18650's that you have attached, it will shut down, so you're adding more points of failure by wiring two in series. I actually struggled with this 6S BMS for a while, and nearly gave up on it, because it kept shutting down, until I realized that the resistance of some of my cells was too high. After re-grading all my cells and culling the highest resistance cells, the BMS was able to stay up.

4.0/5

ID del producto: 388596675

Transacción segura

Detalles

Brand
daier
Battery Cell Composition
Lithium Ion
Recommended Uses For Product
Bicycle
Unit Count
1.0 Count
Voltage
24 Volts

Comprados juntos con frecuencia

daier 24V 6S 40A 18650 Li-ion Lipolymer Battery BMS PCB Balance for ebike ebicycle

200mm(7.9in) Width PVC Heat Shrink Wrap Tube 18650 21700 26650 Lithium Battery DIY Battery Pack 3M(9.9ft) Length Blue

MatchWhiz Flat Width 5.9in(150mm) PVC Heat Shrink Wrap Tube for 18650 21700 Lithium Battery DIY Battery Packs Blue Length 9.9ft (3m)

Descripción

daier24V 6S 40A 18650 Li-ion Lipolymer battery BMS PCB Balance for ebike ebicycle

¿Tienes una pregunta? Mira lo que otros preguntaron

is there a specific order that wires need to be soldered to the board? Mains first then balanced leads for example?

Where does the charging lead connect?

can anyone tell me how to connect to the load? do I use p+ and p-?

Can I wire two of these in series to make a 12s?

Preguntas comunes

Trustpilot

Trustscore 4.5 | Más de 7,300 reseñas

Reema J.

Plataforma perfecta para artículos difíciles de encontrar. La entrega fue rápida.

Hace 1 mes

Meera L.

Transacción sin problemas y el producto llegó en perfectas condiciones.

Hace 3 semanas

Ver todas las reseñas de confianza

Compre globalmente, ahorre con Desertcart

Valor por dinero

Precios competitivos en una amplia gama de productos.

Compre globalmente

Sirviendo a millones de compradores en más de 100 países

Protección mejorada

Opciones de pago confiables que adoran los compradores de todo el mundo

Garantía del cliente

Opciones de pago confiables amadas por los compradores de todo el mundo.

Aplicación DesertCart

Compre sobre la marcha, en cualquier momento y en cualquier lugar.

Bs.372

Derechos e impuestos incl.

Boliviaalmacenar

Envío gratis

with PRO Membership

Devoluciones gratuitas

30 diaspara usuarios de membresía PRO

15 diassin membresía