Brinsea Ovation 28 EX Egg Incubator With Automatic Humidity Control and Egg Turning for Hatching 28 Chicken, Duck, Other Bird Eggs, Precision Digital Controls, Temperature Alarms

54 out of 56 eggs hatched. Humidity and temp was on point the whole 21 days. The only downside about this product is you have to take the lid apart in order to clean it which is a bit of a hassle if you can't put it back together correctly

Set it up immediately. There is a little bit of work required to set it up but once the hoses are connected it’s ready to roll! I love this incubator because you can adjust your humidity electronically versus fighting to keep the humidity where you want it manually. Been running for 2 days and the humidity fluctuates about 5% before the pump kicks on to siphon water tonight correct it. It is worth the money if you plan to incubate for a few years. Got a clutch of silkie eggs in there now.

You can't go wrong with brinsea, so reliable. I never have to worry about anything going wrong and my hatch rates are always so so good with this incubator

Best incubator I've used in decades of poultry raising. The Brinsea is rock solid on temperature control. It's excellent on humidity for most of incubation period and decent to good on late stage humidity. The latter is one of those get-to-know the device issues. And the humidity for 7/8th of the process is flawless.I am in my fifth year of using my Brinsea 56 Ex. So my review is unusual in that it's a rather long-term evaluation. Two maintenance issues are a pain, but only one of them is serious. The more minor issue is the need to replace, every year, the short internal humidity tube that winds around the capstan pump. I get anxious every time, but it's not that big a deal. Especially if you refresh your memory with one of Brinsea's excellent YouTube videos. I guess I am getting old and don't want to fiddle! And for the price, I wish I didn't have to.Which brings me to the cleaning issue and the related serious durability problem. To continue to see through the top, you must clean off the chick down that collects on the inside of the top. Wiping off the down is easy. But doing this requires you to remove six small screws that hold the inner liner below the top. Four of the screws are tiny and do not unscrew easily, even with a small screwdriver I've dedicated to this task.Furthermore, the screws insert into plastic housings that join the top and the inner liner together. In the fifth year/fifth time I cleaned, two of those housings cracked, one seriously. Probably Brinsea would say it's an over-tightening issue. And it probably is. But it's uber challenging to always stop the screws perfectly. And it frustrates me that there aren't small wingnut style bolts or some such instead of these tiny screws. Most of all, there should be a steel sleeve in the plastic for the screws.This year, my inner liner appears to be sagging in one corner because the screw won't hold in the cracked housing. The key role of the inner liner seems to be to keep chicks away from the fan. But since I hatch in separate baskets or mesh bags, for pedigree purposes, I hope I can remove the inner liner without much consequence. Otherwise, this mostly great, expensive incubator is shot after five uses.

PEAFOWL/PEACOCK OWNERS:You will need to buy the larger carriers meant for 'goose eggs'. The carriers that come with this are Too Small for peafowl. The larger carriers are sold separately.I have not yet tested the incubator itself.

I ordered this egg incubator based on reviews from blogs and websites. I had a batch of ultra-rare eggs coming in and I wanted an incubator that had humidity controls and was well constructed. First, the power source cord did not fit tightly into the incubator and kept falling out and turning it off. I contacted Amazon customer service and they did give me a credit to buy a new cord. My eggs had arrived so I needed to get started and used duct tape to secure the old cord. When it got to the point to turn on the egg rotator, the gear did not line up well with the egg tray. I tried to troubleshoot but it appears the plastic is warped and it will not sit correctly. The new cord arrived yesterday and when I plugged it in, it is still loose. The issue is the machine and not the cord. I am in the process of trying to find an incubator from a friend so I am moving my eggs and then I will return this machine. I never write reviews for purchases but I felt this one was important for the amount of money spent. If you do decide to still purchase this product, make sure you get it well in advance to test it out before your eggs arrive. There appear to be some major issues with parts.

I got the incubator a few days ago, so I can't attest to it's working capability. I was really annoyed to notice the tip has a huge crack. It probably won't effect function all that much but the thing isn't cheap. Return it you say? Great idea but I have about $500 in eggs I got because I knew the incubator was coming. So I'm stuck with this thing.

The incubator purchased did not function properly however the warranty department was good and I was able to send it to them for a repair. They fixed it and send it back to me. I appreciate the good customer service.