Ladder Leveler Pair,Ladder Accessories Tools Working on Stairs, Adjustable Ladder Leveler for Stable Platform and Ground Level for All Surfaces-Standard Version （20"）

These work great on my aluminum extension ladder. The instructions call for them to be installed over the bottom ladder rung. In my case the rung extends out on both side of the ladder frame about 1/4”. They provide washer and tell you to stack washers under the mounting bracket where the bolts go thru to keep the bracket level and elevated off of the rung. The issue I had was it took four washers under each bolt, so a total of twenty washers per side to keep the bracket flush and just above the ladder rung. The problem is they only give you enough washer to do one side. I ended up using some nuts I had as spacers, which solved the problem easy enough. These extension are solid and very easy to adjust up and down. The castor swivel and are heavy duty, I think they will last. They will also screw completely off and the adjustment rods can be pushed up and out of the way if not needed, and shouldn’t interfere with the original feet. The only downside to having these installed is that now the ladder won’t stand on its edge without having it leaning up against something. Overall, I highly recommend these levelers to anyone needing extra safety for their ladder when on an uneven surface, they are an excellent value for the money and are built to last.

I bought a 20' extension ladder for use on uneven ground and stairways. These levelers worked so well and are very stable. The keep me safe. I have used them in inclines and stairs and it makes the ladder level. They are very easy to install. You may need to add a few washers, as spacers, to the screws depending on the brand of ladder you have. I have a Werner.

I was very impressed with the quality of this product--the design is well thought out and easy to use. As can be seen in the photo, it is ideal for uneven terrain, and might even work on stairs if the tread width is sufficient. The parts are very sturdy, as they should be for safe use on an extension ladder. The cam-type locking plate makes adjustment very straightforward. I would have given this five stars if the installation had been easier. My ladder rails are channels (as opposed to tubes), so the screws were too long and had to be cut off to eliminate the potential for cuts. The mounting holes were so close to the pole that getting tools (and especially sockets) in to make for a quick install was difficult. A couple of minor design/packaging corrections would make this set a real winner: 1) Widen the bracket slightly so that the mounting holes are clear of the pole, and 2) Provide a second set of shorter screws for applications where the ladder rails are channels, not tubes. The supplied wrenches were useful but most DIYers would have better suited tools.

Seems strong heavy and durable, used it for about 30 minutes, then legs started to not lock and almost fell off my roof, horrible product, had to use vise grip pliers to hold legs in place while trying to finish the project. Would not trust it ever again.

Great ladder leveler for inclined floor or uneven surfaces. Easy to install. Very strong and easy to use. Can be adapted to wide foldable ladders with additional parts. Made of strong steel. Adds some weight to the ladder, but makes it much safer. Highly recommended.

Heavy duty and easy to install. Works good outside on soil or grass but the angle of the ladder is very important.

Instructions are not very helpful. But, if you can decipher them, the ladder works as hoped. It is important the brackets are placed as needed.

These things are stout! Installation was a bit wonky because they did not included enough washers for a stable install on my ladder (a Werner, very popular ladder brand). But that was a minor inconvenience. Gave me a chance to sucessfully go digging through the junk drawer for more washers! No instructions were given about which direction to install the bolts. They are crazy long for this application, but they work. I opented to have the head of the bolt inside the ladder rail to prevent the length from creating a tripping/snagging hazard. They stick out to the side like this, but within the bracket, and don't seem to interfere with the operation. Time will tell how they hold up. I store my ladder in a covered area outside, so a bit concerned about surface rust, but doubt that would have an impact on safety or functionality. Overall very impressed with the product!