UTG 3-Slot QD Lever Mount Adaptor and Riser, Medium Profile, Black

Function well

Excellent product at a very attractive price. I bought three. One mounts my Bushnell red dot sight, the other two mount my 4X scope. On my M-4 carbine, I needed to remove my front sight - no big deal, just a couple of minutes of work - so the red dot did not superimpose on the tip of the sight. This gives me a fast and perfect field of vision, with the "ears" of the front sight almost automatically drawing your eye to the red dot. It also now completely clears the view of the low mounted scope. Removal and replacement of either takes you back to a perfect zero. Just remember to pull the mount back in the slots as you lock it down. Easily mounted and adjusted right out of the packaging, in just a couple of minutes. With no effort to re-zero the scope after installing the lever mounts, my first group was just over an inch "off" at 100 yards. That is great precision.

I would have given this five stars if it wasn't missing the set screw that adjust the clamping tension. Reading other reviews it seems to be somewhat common. If you receive one without the set screw and don't want to return it, the screw is a m5 set screw that is 4mm long. I have easy access to them, so I keep the one I received. That being said this is a nicely machined item that clamps down solid once you adjust the tension with that screw. The mount comes with an allen wrench and instructions for tension adjustment. The body and clamp bar are made from aluminum with a pressed in steel cross stud and aluminum cam lever. I like the design and light weight of it, and expect it will hold up well for light to medium duty use.

I used this to make my bipod a QD bipod for my AR-15. Works perfectly, and lets me swap my bipod on or off my rifle in under 3 seconds. Great way to reduce weight forward of the receiver while still being able to at a moment's notice plop on the bipod to get that perfect shot stability if you're gonna be taking a lot of shots from prone, or just want to easily equip it when firing from the bench, then having it off when at home. I'm sure any other accessory you want to transform into a QD accessory will work, too, so long as it mounts to the rail properly.

I wanted to install a red dot sight on my rifle but attachment directly to the picatinny rail left the sight too low. I needed add a riser. Most riser I found were too tall and would have been attached using a screw. This one solved the issues as it was just the correct height of about 3/4 of an inch, and as a bonus it locks in place using a clamp style attachment. The tension of the clamp is adjustable and solidly attaches to the rifle without coming off. This way the sights San be removed simply and quickly for packing the rifle or other reasons and reattached with little if any variation of the aim point

The spring action is a liiiiiiittle creaky/crunchy but a bit of oil and time will fix that. The lock is perfect and the adjustability was extremely easy with provided hardware. Solid clamping force with no discernable shift. Honestly, I don't know how I ever lived without a QD mount. I may buy 2 or 3 more as backups and for other accessories down the road! These don't cowitness with most red dot/iron combos (too low)... But they're QD. The whole point is you remove them if you don't need them. Duh.

Great mount. Fits snug. Holds zero perfect with my red dot and on my 4.5-18 scope. I have removed and reattached my optics multiple times and keep a perfect zero. Only reason it doesn't get 5 stars is the cross bolt is round and not square causing some slack on the rail before you lock the lever. Just remember to always pull out the slack by pulling the mount back tight against the rail then lock the lever and you will have no issues

Over a period of years, I've purchased quite a few products from UTG, and I've never had any issues with anything they've sent me. I'm happy to see that they've started making some of their stuff in the USA. This item at QD riser is made in China, and I doubt that anyone here makes something like this. I may, or may not, use this for a red dot optic, which has a Torx head rail attach. I like to be able to take things off my rifle rail, if they aren't needed for what I'm using it for. For the time being, I mounted a Streamlight TRL 2 on it, and it fit perfectly! I don't always need that light, so when I don't, it comes right off with no tools. I like this product, and I like UTG, so I am most likely buying three more of these to mount varmint lights on, to mount on various rifles. Most of our property defense happens at night, with wild pigs, coyotes, and other mid size varmints, but if I'm taking one of those rifles to the range, it's nice to easily remove the varmint light. So, yes, I am pleased with this purchase, and would recommend UTG products to friends and family, and will continue to purchase UTG products myself.

Montate su AR10 (308) come basette per ottica, non hanno fatto una piega dopo oltre 100 colpi... stabili e non si allentano. Durata nel tempo non so, ma se paragoniamo i prezzi con altri più blasonati brand non c’è paragone!

I wanted a "cheaper" version (besides an arca rail) to be able to remove my bipod. This works great. I can snap it on and off or move it along my picatinny rail nicely. I use this in PRS (22lr). Just what I was looking for. I ended up getting a second for the same setup on a different gun.

使いやすい。コンパクトで軽量。幅調整出来ないので、レイルを選ぶと思います。

Hab die Erhöhung verwendet, um das 45° befestigte Rotpunktvisier auf meiner HK243 ergonomischer (Höher) zu befestigen. Die Schnellbefestigung war dabei zweitrangig. Da sie aber gut funktioniert, werde ich zukünftig das Rotpunkt für den Waffentransport abmachen. Weil einige das negativ bewerten: Die Klemmwirkung am Hebel ist einstellbar. Dazu wird ein kleiner Inbusschlüssel mitgeliefert. Ich finde die UTG machen ein gutes Produkt, zu einem guten Preis. 5 Sterne

Ich habe die Montage auf einem MKE T41, also einem G3 Klon verbaut und bisher keinerlei Probleme. Zwischenzeitlich hatte ich es auch kurz auf einem AR15. Auch hier gab es keine Probleme. Keine Ahnung, ob alle Montagen von UTG so stabil sind oder ob ich einfach nur Glück hatte, aber bisher ist alles im Lot. Meine Montage habe ich im Mai 2015 gekauft. ******** Update vom 16.09.2016 Zwischenzeitlich habe ich noch eine weitere Montage bestellt und hatte in den ersten Minuten auch Probleme diese zu befestigen. Ich habe dann den Imbusschlüssel dazu verwendet die Schraube ganz herauszudrehen und habe den Spannhebel vor und zurückbewegt. Dabei ist mir aufgefallen, dass aus irgendwelchen Gründen die Seite mit dem Spannhebel, die an die Picatinny-Schiene gedrückt wird, nicht richtig anlag. Sitzt jetzt nach etwas Gefummel und ca. 100 Schuss immer noch bombenfest auf meinem AR15.