Meguiar’s Pro Speed Compound M10032 - Fast-Cutting Compound for Heavy Scratch and Swirl Removal - Professional Car Polish - Compound That Removes up to 1200 Grit Sanding Marks, 32 Oz

If you're looking for a product that works will with 3M pads, costs much less than the over-hyped European counterparts and removes the haze left from sanding, this is it! This is the only product I've found that removes 100% of the haze with only a few passes and works well as a 1-step polish.For my use, I'm using it to remove the haze left by 3M's Trizact 1500 then 3000 pads and with their white compounding pad. I first tried Sonax's Cutmax, which is a step below M105. Both of those products only get rid of ~75% of the haze after sanding. I also tried Menzerna's Super Heavy Cut 300 compound and that gets rid of about 90-95% of the haze after several passes with a good amount of pressure. Haze was still visible when inspecting under direct light, especially on curved panels where heavy pressure or high buffing speed is dangerous. With Meguiar's M100, I can do about 2 quick passes at medium speed and all the haze is gone, leaving a finish that's good enough to call 'show car' quality. The M100 also worked great on plastic bumpers at a low speed where using the other product made no noticeable difference. This will definitely by my go to compound going forward!That said, this compound might be too aggressive for doing a light correction for swirls or car wash scratches. If you use this as an all-in-one compound for light correction work, I'd recommend a less aggressive pad and low pressure.

Decided to use this instead of my normal Meguiar's Ultra-Cut Compount 105. I've been using 105 for years as part of a 3-step process with a Porter Cable DA Polisher (PORTER-CABLE 7424XP 6-Inch Variable-Speed Polisher). I use SPTA 6inch 150mm Buff Pad Polishing Pad kit For Car Polisher Pack of 5Pcs. Here are my steps:1. Ultra-Cut Compound 105. Orange SPTA pad.2. Ultra-finishing Polish 205. Blue SPTA pad.3. Synthetic Sealant 2.0. Black SPTA pad.This has more cutting power than 105 but I did not notice aggressive cutting as other reviewers. It also does not have powder residue like 105. I made two passes on my hood (2yr old car) and noticed improved performance. After two passes with M100, 1 pass with 205 and 1 pass with Sealant 2.0, I still had a few micro-scratches in the clear coat but fewer than I've noticed while using 105 after just two passes.Bottom line - I recommend M100 over 105. More cutting power than 105 but not super-aggressive. No powder residue.

Only use it for a couple days but seems really good! Man is it easy to wipe off 👍🏼

I used Meguiar's M10001 Mirror Glaze Pro Speed Compound on my vehicle, and the results were impressive. It quickly eliminated deep scratches and swirls, leaving a flawless finish. The 1-gallon size is perfect for multiple uses, and the product is easy to work with. Excellent for anyone seeking high-quality paint correction.

It got rid of 1000 grit sand paper scratches on the gauge panel on my Honda Rubicon. I bird pecked and scratched the clear plastic very badly while it was sitting in a tractor shed. It polished out very good and I did it by hand.

It is rated as a very aggressive compound. I struggled with my hefty 7-inch Harbour Freight rotary polisher with an old abused wool pad and didn't burn anything, even though it was my first correction job on a car. It removed 1500 grit sanding scratches after 4-5 runs. When I started using 2000 sandpaper, it accelerated the compounding process and the surface of my car was already presentable. I don't have experience with other compounds, but this one worked well for me.

This product completely blew me away. I figured there’d be no saving on the paint in the pics so I figured let’s give it a shot. Not like it could get any worse. I used it on heavily damaged single stage paint applied with a rotary buffer and a wool pad. I worked the compound in on speed 3 with very light pressure and couldn’t believe what I saw once I wiped off the remaining residue with a microfiber cloth.I couldn’t believe what I saw!! I highly recommend trying this on paint you think is far too gone. The product also works fantastic on newly painted wet sanded panels. It’s worth every penny!!!

Been in the auto repair business for over 13 years and to be honest I hate having to cut and buff because it's so time consuming and tedious work but out of all the products I've used over the years this is by far the only product that I come across that will literally cuts my time in half and actually makes me look forward to cutting and buffing this product is well worth it and is in my opinion the only product that makes buffing seem effortless