Pipopa2.5HP 6540GPH Pool Pumps Above Ground and Inground, 1725RPM/3450RPM 2-Speed Swimming Pool Pumps, Super Power, Salt/Fresh Water, IP44 Waterproof, Energy Saving

My inground pool pump went bad and replaced it with this one. So far it’s working great. The flow and the power of pressure the jets are throwing back into the pool is a lot better than my last pump. Very quiet. And for me easy to wire up and re connect the PVC pipes. Working great no leaks. Great price for this unit also. Back to enjoying the pool for the summer. Thanks amazon

This is the second Pipopa Pool Pump I have purchased. The first was over a year ago and it quit shortly after it was installed. Pipopa immediately sent a replacement and asked that I return the original for engineering to examine to find the failure point. The replacement is a 2 1/2 HP dual speed pump that I am very pleased with and still running like a champ. It is quiet and just the right power to keep my large salt water pool clean and fresh. I purchased the second pump, a 2 HP dual voltage pump, for my father's house and have had two fittings break at the top pump housing between the threads. Again I contacted Pipopa Customer Service through Amazon and they were quick to respond sending 2 replacement fittings and assurance that their engineers would look at the breaks to see if the fitting design could be improved. These pumps are not terribly expensive and are a great value for the money. The fact that their customer service is so responsive is very refreshing and certainly an added value for the money. I would recommend these items to friends and family alike. Thank you Pipopa for your willingness to exceed my expectations.

BUYING THIS BRAND IS A CRAP SHOOT! FIRST PUMP SHORTED OUT UPON CONNECTION SO WAS RETURNED FOR A REPLACEMENT. THE 2ND PUMP WORKED FOR 7.5 MONTHS AND IS NOW LEAKING WATER ALL OVER THE GROUND WHEN ON. THIS PUMP WAS USED SPARINGLY AS IT IS ONLY FOR THE WATER JETS IN MY JACUZZI. WOULD ONLY RUN IT A 2-3 TIMES A WEEK FOR 5-10 MINUTES JUST TO RUN IT. I HAVE THE SAME BRAND PUMP FOR MY WATERFALL AND SO FAR THAT HAS NOT HAD ANY ISSUES IN 1.5 YEARS. KNOCK ON WOOD!!! PRICE IS GOOD, JUST DON'T KNOW HOW LONG IT WILL LAST

So far... not too bad. Installed the pump in July 2023. Ran for about a month till end of season closing. Re-opened pool in April 2024, pump is working great. 4hp speed is excellent for opening the pool as it will circulate a 30,000 gallon inground pool in about 5-6 hrs. Kick it down to the 2.5 hp for conserving electric.Very quiet. Took a little extra work to install but over all not too bad. So far, it has been worth the money. However, I have only run this pump in actuality about a month and a half.

This pump has replaced a 7-year-old Hayward that seized up and tripped breakers. Like so many on here I was done with Hayward and sought this as an alternative. I chose this brand because of the reviews that mentioned excellent after-sales support. So far I haven't needed it. I had to redo the plumbing due to small dimensional differences between this one and the Hayward. This is more powerful than the Hayward, I can turn on my waterfall feature without dropping the pressure so much that I lose heat. The low speed setting will not raise the pressure enough to engage the heater. That is okay, my plan was to use it to keep the pool clean in the off season and save a bunch of energy doing it. The high setting makes a normal level of pump noise, the low setting is very quiet. I bought a dryer cord and outlet instead of hard-wiring it because of the awkward location of the pump motor. If I have a problem I will come back here and update this review. Note that it is possible to put the strainer basket into the pump housing backwards, so just pay attention where the hole in the basket is relative to the inlet pipe.

This is our second season with the 2HP pump. With the right tools, I changed it out in a few hours. Granted it did not line up completely as the old pump. I do recommend placing the pump on a rubber mat if you are concerned about vibration and purchase the pump protector hood. Hopefully, I will get another (10) years from it. No leaks, no vibration, no complaints!!!

I’ve seen many negative reviews on this product. But I installed it myself had no issues whatsoever and it works perfectly. I highly recommend it.

We bought this pump June 8th, it is no longer working. The fittings cracked, water spilling out from bottom of pump. Contacted seller, and they replied back saying you have a warranty send it back. I advised send a replacement and I'll send it back. I have no filter and should not have to put out more money and get a new filter. If there's a warranty than send a replacement and I'll send the broken one back.

Remplacement de ma pompe de piscine

I hesitated between 3 or 4 stars. I was able to wire this up myself, you need 10 gauge crimp on spade connectors, then it makes sense. It works well although I am having prime issues. It does prime itself but I have o-ring problems in either the lid or the connection to teh skimmer. It pulses because it loses prime. Invest in O-ring lube, it will help get the filter basket lid off and on easier and seal the possible prime leak there. The other issue is at the inlet, the pump body is two plastic extrusions welded together. Where the O-ring sits on the inlet there was a bump where the extrusions are misaligned. I was able to carefully file the bump down, now I need to use a very fine sand paper to smooth the file marks. I have 95% seal now and less surging. I have a similar leak on the outlet and I suspect the same thing, the two halves of the body are slightly misaligned. Despite this I quite like the two speed pump and with my little robot it cleans the pool very fast.

Good produit

Tres difficile a primer la pompe

Parfait travaille bien fait la job