BK-mini-LFE Mini Low Frequency Effect Transducer Bass Shaker

I bought this on a Wim thinking it can't make that much difference. I use it for flight sim and it adds a whole new level to the sim. I fly in VR and I bolted the buttkicker to my chair. You need to buy An amp to power it separately. (Go careful what you order if following amazon's suggestions here as the first amp I purchased didn't include the power supply to run the amp. I still have no idea why you would sell an amp that you then need to buy a power supply separately to make it work. BUT.. this is a review of thr buttkicker. Loaded the sim. Turned on the amp to power the buttkicker and tried it out on several planes. You feel the surface of the runway now. You get the thud of the wheels retracting. You feel the vibration of the engines and that changes depending on the throttle power and or propeller pitch. This is not a subwoofer. You don't hear the bass. The buttkicker provides vibration through the chair that simulates what's going on in the sim. I had to purchase a aux splitter so that the audio out on the pc went to the speakers and separately to the buttkicker. The only negative I have found so far since I started using it is that it now makes the joystick feel 'dead' resting your arm on the armrest when you operate the throttles makes you feel the engine vibrations. The joystick has no feedback.. and after adding the buttkicker you really notice the lack of feel... Unfortunately for my bank account. There are joysticks out there that will solve that... the buttkicker is worth it for the emersion you get in sim games. I'm not sure it would make such an impact in other types of game.

The Buttkicker Mini LFE works great now that I have got the right amplifier for it. I originally got a Yamaha stereo amp but it didn't work. I now have a Dayton Audio SA100 subwoofer amplifier which is ideal. The Buttkicker is very powerful and gives a very immersive experience. It only operates at very low frequency so only operates for deep booms, explosions and phaser/ laser fire not just general bass which is what I wanted. My source is the 2nd subwoofer out port on my Pioneer VSX 1131 receiver connected to the low level input on the SA100. The Buttkicker is connected to the rear mono cables (with spade connectors) of the SA100

great items for a sim rig , better than a flat transducer , give greater movement .

■2020/07/04 追記 DTS 5.1chソースでの様子の動画（ガ●パン最終章 第二話の冒頭）を追加しました。参考になれば。 ーーーーー 楽●で扱われている安価なボディソニックトランスフューザー（振動ユニット）が長いこと品切れ状態のため、諦めて値はやや張るもののこちらを購入。元々ホームシアターでサブウーファーを左右2系統使用していたので数を合わせました。 暫くして到着したソレはかなり小柄でしたが、持ってみるとズシリと重く（約1kg）、生半可な固定では振動ユニットが脱落しそうだったので、当初の外からのタッピングビス止めを変更し、底板の内側からビス・ナットでがっちり固定し、更にロックタイトのネジ止め剤を使用し振動によるネジ緩みを防止しました。 そしてAVアンプのLFE出力を2分岐し、一方を元からあるサブウーファー・もう一方をLepyのデジタルアンプ168S経由で本振動ユニットと接続しましたが（※低周波域が調整可能で2ch出力可能なものは恐らくこのシリーズ一択）、小柄なサイズからは想像できない程の強烈な振動を味わえました。 近所迷惑なくらいに出力を上げると振動ユニットが耐えきれてないような振動を発しますが、そうなる手前までは嫌なビビリ振動は発生していないので、筐体の剛性はかなり高そうな感じです。ユニットから直出しで伸びるケーブルはかなり短いので、アンプまでの距離があるようなら要延長。 いただけないのがインスト表。全英語表記くらいは覚悟していたのですが、A4くらいのペラ紙一枚のソレはイメージ絵すらなくネジ径はインチ表記のみという文化圏の違いそのまんまという内容。正直なところ殆ど役に立ちませんでした（苦笑。 振動ユニットの筐体をがっちり固定したい場合、ミリ換算だとネジ径6mm・長さ25mm（3点止めの場合）相当のネジが必要になりますので念の為。

Viel zu teuer. Übersteuert gerne, und macht dann laute Kopfgeräusche. Wollte das Teil zurücksenden, aber die Frist ist abgelaufen. Habe nun einen billigen Bodyshaker für 40 Euro dran. Ist besser!

I bought this to add to my SIM racer set up. It has good vibration bolted up easily has lots of options for bolting and mounting I have it hooked to a 50 W amp and it has a nice steady firm vibration would recommend.

What else can I say this thing kicks but literally. Works great on the P1X sim racing rig. Mounts right to it with your own hardware of course. I have 2; one in the front and one in the back. It’s more than enough to feel Everything you need to feel. Wheel lock, wheel slip, gear-shifting, engine vibration and anything else your sim will put out. Quality product; 3rd one I bought now.