SAE Extension Cable, 2FT 10AWG SAE Battery Connector, Ring Terminal Harness Accessory Cable

I did have to go to the hardware store and get a little big longer of a bolt to install this to my 2014 Street Glide but, otherwise seems to work great! I can tuck it behind or in my bag, I have enough wire and it seems to be a nice sturdy cable!

Very heavy gage wiring to connect to battery maintainer on my lawn tractor. Will also support electric tractor accessories. Very happy with the quality of construction

Worked perfect for my DIY solar box. Love the versatility of the SAE connectivity. I used them for everything, they are gr8!!

If you need this, then you probably don’t need a description of it. You just need to know that it’s ok, and it is in fact ok. It actually is what it claims to be and it does what it’s supposed to do and that’s the best sales pitch I can think of for such a simple item. Lives up to expectations and is a good value.

SAE plug and wires are good quality. I only have an issue with the ring connectors. The rings are very thin and will break off very easily. I had to replace the ends with other ring connectors. Great upgrade to the stock snapper mower charging setup though.

It’s not an extension cable. It’s used to connect a battery charger or maintainer to a vehicle battery terminal instead of clamps. I looked at the photo instead of description and it’s what I wanted. The supplier should fix the description.

This was an upgrade for a much thinner fused SAE cable. This is nice and thick and doesn’t get too hot. I wired it directly to my battery (which happens to be in the trunk of my car) and used it to power an Ecoflow River on a road trip. The Ecoflow was powering a 12v fridge and it kept my Ecoflow charged up without any issues. I cannot stress enough, this did not get too hot, just warm. I had a much thinner SAE cable previously on there and it worked fine for using a trickle charger on my 12v car battery, but anything beyond the trickle charge made the wiring heat up way too much for my comfort. This continuously put out 90-100 watts for 8+ hours at a time and I never had any issues. When I stopped, I’d unplug the SAE cable so I didn’t drain my car battery. It came with a 10 amp fuse installed, I replaced it with a 15 amp fuse to allow the maximum 12V/100 watt input into the Ecoflow without blowing any fuses. Again, it will get warm but the thicker gauge wire handled it just fine for my application.

Perferct for dyi kayak build

Works well

Works fine, shame I only got 1 instead of the advertised 2 Pcs

The leads are meaty, I think the add states 12 G, which for us Metrics is 2.5 sq MM. They are multi stranded and are flexible enough to tuck in tight spots, the standard ATC fuse holder is weather proof and comes with a 15 Amp fuse standard. The 2 Ft length is just right for a battery tender connection on my Honda Rebel.

Item appears to be good quality. Add clearly says 2PCS. Seller only sent one.