NEIKO 01970A E-Clip Remover & Installer Tool Set | 4 Piece | SAE | 1/4" to 3/8"

Owners of hydraulic operated equipment should invest in the proper tools. After hours of videos for rebuilding my tractor FEL I got this tool. Do not use old modified screwdrivers. The tips are machined with rounded ends and will not be prone to scratching machined surface where the seals are seated. The tools help install and removal of seals safely and help making a rebuild of cylinder a quality job.

High quality perfect for small O rings on my garden tractors hydraulic ports. I had removed the old rings and tried repeatedly to insert the new ones, but none of the tools I had would help me get the O rings into the connector and into the slot. After trying for a couple of hours, I came to Amazon and found these. Once I had the ring into the connector, I used these to manipulate it into the slot. Both connectors were done in less than 10 minutes.

Does the job, but it flexes a little. Grip is fine, and the blade wasn't too sharp

Great product. Heavy duty and well worth the money

Safely removes orings without damaging the oring or the device I'm removing it from. Having several different tools to choose from helps a lot.

It's a handy tool. Saves on clips from getting lost.

Currently I'm maintaining about 150-200 bows for Boy Scouts of America in Circle Ten. When replacing the bushings, it's a pain to remove the e-clip with a pic and install it with a screw driver. Half the time the e-clip will go flying across the table onto the ground to never be found again. The extraction tool if used correctly, barely pushes it to the back of the shaft and allows it to be gently pulled off with fingers while under no tension. Installation is a breeze because it holds the e-clip comfortably. I have big fingers so this is a huge game changer for me. I can remove and reinstall e-clips in seconds safely rather than minutes while trying to make sure it doesn't go flying without using this tool. I can't speak to durability, but it should last quite some time as long as it isn't abused. It is packed with a bit of oil, so I wiped them down and wrapped the spare tools in a paper towel.

Very handy for those hard to reach places.

Useful e clip remover and installer tool got it as a return item so price was very good

Pinzas muy prácticas para acceder a espacios reducidos y necesitas alcance. De material resistente, así como el mango. Son cuatro pinzas para diferentes formas adecuado para ciertos ángulos cada una. El precio fue bueno respecto a otras marcas más caras.

In America, I had spent a fortune at Mac tools on these. Well I needed to try to find a replacement set here in Ireland, and these are made exactly the same as those, same tooling marks and everything for 1/8th of the price. Great tool!

I bought something like this. It was cheap, but tip was very short and holding bolts were not enough strong. This one is good quality and I can work without any trouble.

Great product