Playseat® Logitech G brake pedal

Very good quality. Perfect fit and looks exactly like the original pedals. Perhaps a tad expensive for what it is, but the quality is definitely there. I bought it because I wanted to make the jump to left foot braking without the hassle of disassembling the pedal set and moving them about. This does that well.

A really superbly made product. Works perfectly. Easy to fit. Made the standard pedal system excellent for left foot braking. A great upgrade.

A bit expensive for a piece of metal but it works perfectly with Playseat Challenge

It is just a peice of metal, there are no instructions, but all you need to do is put it under the wheel and clamp it all on.It can go left or right side, you could bolt it on but none of the holes seemed to line up to the wheel base so you would probably need to drill one or two depending.I didnt drill anything and my 14 year old son has had no bother, just tighten it regularly.

Perfectly adapted for the G920 shifter, but you must remove it to fold the playseat challenge or just change his position... Ha, and it is very expensive, no guide, no box...

A quality metal part, nicely machined and easy to fit, that does the job perfectly.

I have a few key issues with this bar in no particular order:1) It doesn't seem to have the right holes drilled into it to fit my playseat challenge. I have no idea why playseat say it's compatible because it isn't and you have to drill the holes yourself.2) It feels relatively rigid when fitted but in practice, it moves about a lot with a stick on it (TH8A) and that just isn't good enough.3) There is basically no fitting setup for a TH8A on the bar, I knew that but it turns out it isn't big enough to modify either. Certainly doesn't work with the default table like fitting screw the TH8A comes with and isn't big enough for the 3 holes to be drilled and screwed into. Even when you do fit it securely the bar itself moves around too much4) The position this puts the shifter in is very bad.All in all I ended up finding a much better solution with motorcycle clamps (25mm) and an angle bracket and attaching the shifter to the side of the seat. I seriously recommend people do that and look up the mod rather than buy this bar as its a terrible solution.

I have the Playsteat Challenge with Logitech G920 and Logitech Driving Force Shifter and this took some 45 mins of fitting it, trying various ways to attach it without instructions, finding bolts and screws that fit plus washers. One bolt holds it in place (bolt/washer not included) underneath the driver's side of the wheel mount then you mount the wheel as normal. You need to find 2 screws to mount the shifter as the clamps don't work with this. If it came with instructions and standard bolts/screws/washers to fit PlaySeat mounts then it would get 5 stars.