TotalBoat Wet Edge Marine Topside Paint for Boats, Fiberglass, and Wood (Bristol Beige, Gallon), 128 Fl Oz (Pack of 1)

This stuff is over priced, over rated, and junk. I attempted to use on my fiberglass boat (yes the surface was properly prepped)well; it wrinkled everywhere, bumped, and peeled on about 80% of the paint job. Now I get to remove it all and paint again. What a GIANT WASTE OF MONEY AND TIME. I tested out the Rust-Olieum Enamel to use instead of the total boat crap and it works beautifully. Highly recommend using that option and NOT this total boat. The difference is remarkable . Look how smooth the grey and red is and how terrible the black is (total boat)

First, I stirred the 1 gallon Wetedge can with a drill attachment for a few minutes. thinned it using 10% Thinner 100. And stirred again with drill attachment.I used a roller only. And it was a Wooster nap roller with a 1/4" nap (not recommended by Totalboat) . Totalboat recommends to used foam rollers for the Topside paint , but it was easier for me to use a nap roller. It still looks great imo . But if I could tip and roll , then I'd go that route. Unfortunately, I had nobody to help me tip so I took a risk and used a nap roller.I thinned the paint with 100 Thinner by %10. Stirred and applied. My boat is a 12' ft boat. I'm almost positive I'll have enough for 4 coats and then some. I'll use the leftover Topside to paint parts of the trailer.For the record, the pictures I provided show only 1 coat of Topside Wetedge (over 1 coat of 1 part Primer) color : Sea Green

This is my first time using Total Boat's WET EDGE. For a one part Polyurethane, I am pleased and impressed. The paint mixed easily and rolled out with good coverage. It dried to a slick level finish. Plus the different tints allowed me to find the color I liked.

As others have stated this paint does take a long time to dry... I was able to get it dry and usable in about 20hours by running a heat gun over it again and again. Then putting a space heater in my garage overnight. It wasn't tacky at all by morning and we were able to go fishing that morning. If your in a hurry this probably isn't the best choice. But for the price I'd say this is a great product. I used the primer as well and have no complaints about that either. The primer dried very fast and I was able to coat the entire top of my boat you see here 2.5 times with one quart.

love this paint my boat look new

Super. Calidad excelente pintura

Great product! It's easy to use and leaves a super glossy finish. Will buy again when/if needed

Amazon: They don't know how to ship the paint so it doesn't get damaged. First gallon of paint arrived damaged. The Amazon computerized return system was going to make me ship it back or some nonsense like that. Without opening I contacted Amazon directly and was sent a second can. Luckily I didn't try to use it, eventually I opened it and it had skinned over 1/4" thick!Product: the product is very hard to use and takes a lot of patience.1) must use primer. I had a newly created boat and tried to paint (only) some hard to reach areas during assembly. It took many coats, at least 4, for coverage. It also eventually yellowed so it may not be suited for semi-enclosed spaces.2) it doesn't follow out at all if unthinned. If unthinned it skins over so quick it's hard to keep a wet edge. If you attempt to tip it, it just leaves brush marks in the paint. Unthinned, but thinly applied, it still takes well over 24 hours to "dry". If you apply it thick enough to self level a bit it never dries fully and is a soft gummy mess.3) If you thin it enough to follow out and keep a wet edge and tip well, it takes over 36 hours to dry, maybe 48 hours. Good luck keeping dust out of something sticky for 48 hours!! When thinned enough to tip it's coverage is even worse, and took 3 coats to cover totalboat's white primer. It took forever, since you need to wait at least 2 days between coats to wet sand out all the dust!4) I've also tried using it to apply softsand and we'll see if it ever dries. I think that the "overly thick" coat that forms (all the valleys in the nonskid) means it will never dry. It's been drying for 3 days now - still wet.Recommendation: don't use this paint.

Unacceptable delivery.....delayed my project ...never again This Company should not dist. This product in Canada.

Contour de piscine en fibre de verre