Ibywind Screen Protector For Oneplus 11 5G 6.7"[2 Pack],Flexible TPU Film,With 1Pc Camera Lens Protector,1Pc Back Film,Bubble Free,Easy to install

Installation very easy. First time I am able to install a screen protector with no bubble. The screen feel smooth, my finger glide easily. It comes with all the accessories you need to perfectly intall. Highly recommended.

I had no problems mounting 2 screen savers on this phone, I took the 1st one off because it had a small bubble in it, I just got to get it perfect! (not sure where that showed up in my old age). I bought a clear soft rear case for it, so the Green what ever it is stays put. I also bought a belt holder, and the panel that gets put on the rear of phone doesn't bother the screen saver. I might push it up in spots, I just rub it down a gain and it's ok. The screen saver stays put, not like th e ridgit protectors, ( would not affix to the screen, I tried 2 companies with same results, this softer material worked ). The alignment tool, squege helped keep in keeping things neat. Reading the directions a couple of times helps a lot. I'm a happy man, which takes a lot!

I got disappointed with this product. It doesn't release all the Bubbles , and while I finished the part 1 and wanted to jump on the part 2, the first part was detached from the screen and made a mess. It's too thin, and doesn't stick well and in the end the phone screen had lots of air bubbles. I don't recommend it at all

After wasting one screen protector, the second one was almost perfect on my OnePlus 11 5G. I'm very happy with the screen protector. It feels basically like the one that came installed from the factory and I don't notice any difference in fit or coverage. The back case protector is useless if you have the black (sandstone) case. Might as well just throw it in the trash because it won't adhere to the gritty surface. If you happen to have the green version of the phone, I suspect the rear protector would work well on it due to the glossy finish. The camera lens protector seems fine. I like that it's black with cutouts, so shouldn't impact optical quality. Back to the screen protector - Installation was pretty easy, but I learned a hard lesson. Leave the screen protector in it's packing sleeve until you are ready to use it. DO NOT t set it down. Apply it directly to the screen after removing from the packing sleeve. Otherwise, the tiny strip of exposed adhesive will pick up debris and it will transfer to the phone and/or screen protector, resulting in a stripe of dust-filled bubbles across the middle of the screen. The charger-port template guide is simple and worked great. The squeegee was fine. Instructions were good enough. Follow them exactly and you should be in good shape. Don't kick yourself if you waste the first screen protector. All told, I succeeded with one screen protector and the lens protector. One screen protector and the rear protector went straight into the trash. I am fairly confident I could apply another screen protector without trouble now that I've learned some hard lessons. I'm very happy with the outcome and feel a little bit weird about the waste, but I would probably buy again. Side note: I'm a little excited about the bit of non-slip mat and the reusable clamshell case it came in. I'm not sure what I'll do with it, but it seems like it could be handy.

Ever since I took off the original screen protector off my op11. I consistently was having problems and wasting money finding a replacement. The glass ones went over the full screen and the edges but part of the screen would not work and the glass screen protector easily came off. Other protectors I was getting bubbles and other problems. Finally I read good reviews for this screen protector. From the packaging, the detailed instructions. Everything you need to install the screen protector perfectly is included. Totally worth the price. The protector is as good or better than the original factory screen protector. I do recommend watching the video as I did mess up the 1st screen protector that is totally my fault but the 2nd one went on beautifully. This is one of the best screen protectors I have used in my life.

Bought two different screen protectors before this one, including a gel screen protector and a tempered glass one, but neither of those compare to this. This is by far the easiest screen protector to install due to the included tool. Took me a few minutes to clean the screen, install, and be on my way. Not only that, but this is the first screen protector where the edges are actually flat against the screen. You can barely tell that a screen protector is even on the phone. Touch response and finger print scanner also are not disrupted. 100% recommend.

The back protective carbon fiber printed screen is flimsy and doesn't hold up at all. It was easy to put on but it doesn't stay on and I just threw it away. I bought this thinking it would give full protection but it only gives some protection for the screen and camera bump. So if you're in the market for the reason I was, I would avoid this. Giving 3 stars because it was easy to install, comes with 2 screens, and the camera protection plate only protects the surrounding glass surface of the lens, not the whole surface because it has holes.

Ero alla ricerca di una pellicola per il mio Oneplus 11 5G che aderisse in maniera perfetta allo schermo. Purtroppo, con le ultime 3 pellicole di vetro, ho sempre avuto problemi di distaccamento di quest'ultima dagli angoli, e per via di questo la polvere entrava e faceva staccare tutto il resto della pellicola. Con questa pellicola non ho nessunissimo problema di questo tipo. Innanzitutto badate: la pellicola non è in vetro. Grazie a questo, l'applicazione è facilissima (zero bolle) e protegge egregiamente il telefono da graffi ed anche botte. Inoltre, proprio per il fatto che non è in vetro, aderisce perfettamente a tutta la superficie del display, ed una volta messa non si toglie. Il kit è super completo e contiene tutti gli accessori di cui si può sentire il bisogno: c'è un tappetino che si applica per appoggiare il telefono ed evitare che scivoli, c'è un supporto che si inserisce nel connettore type-c del telefono e si usa come allineamento per applicare la pellicola, e c'è anche una sorta di plettro per far aderire alla perfezione la pellicola allo schermo rimuovendo le bolle. Oltre a questo, c'è anche la protezione per la lente tonda della fotocamera, ed anche una pellicola posteriore con trama "fibra di carbonio" trasparente che protegge il retro. Potete andare col sicuro con questo prodotto! PS: per via del fatto che la pellicola non è in vetro ma in TPU, potrebbe far storcere il naso il feeling col dito all'inizio, ma dopo qualche giorno ci si fa l'abitudine ed è quasi piacevole! Ho avuto inoltre un piccolo problema col prodotto ed ho contattato il venditore, il quale ha provveduto a fornirmi un'assistenza incredibile ed inaspettata!

OnePlus kullanıcısı için çok doğru ve kalteli bir ürün

This kid has pretty much everything and it's really good quality it has the foam that you lay your phone on to do the installation it has the guide it has the screen protection guide so that you pop it into your charging port and lay your screen on top of that line the dots and it makes installing the screen protectors so much easier. Has the camera cover and although it covers up the Hasselblad name it protects your cameras incredibly well. I haven't found anything bad or even remotely not useful with this kid cleaning tools are there the tool to remove air bubbles and do a proper install on the screen protectors there everything is there and the video instructions are pretty on point too.

Best oneplus11 screenprotector I ever owned, super thin, no bubbels and almost feels like I Aplied nothing at all.

最高