2.5" SSD to 3.5" SATA Hard Disk Drive HDD Adapter Caddy Tray CAGE Hot Swap Plug (Pack of 2)

All metal construction to draw heat away from the drive. Fits Samsung SSD (and I'm sure other drives) perfectly. Easily mounts into a 3.5" drive bay in your computer after installing your 2.5" drive into this adapter. Highly recommended!

I just purchased an HP Z840, and it came with a single 2.5" ssd installed in the full size HD Tray. I looked on amazon for the HP product that would allow me to install more ssd's in the existing HD Tray, and it was an HP product, a single adapter, at a price of $100! I continued surfing and found 2 adapters for the price of $16! I read the reviews figured it can't be a bad choice. And I wasn't disappointed. The only problem I had was that you need infant fingers to get the screws in place to install the ssd into the adapter. Aside of that everything went together like perfectly!

Used these to mount 2.5 SSD's in a G-Raid. Five minutes to install, comes with 8 proper thread screws both fine and course. Worked perfectly, quality fine.

Good purchase. Glad the screws came with them.

This is the $9 alternative to the very expensive HP 2.5" SSD/HD adaptor. No longer produced, it is purchased USED on eBay, it cost between $15 to $25..The DSLRKIT product requires securing the 2.5" SSD/HD with four screws on an aluminum tray. The device is then mounted on an HP designed plastic insert with flexible side rails. Little round metal stubbles on the rails are inserted into the metal tray holes to hold the adapter in place..I experienced a few quality control issues. On a few tray holes, they were tight. I had to use a small hammer to pound the metal stubbles into place. This became a problem if user had to dismantle the 2.5" SSD/HD in the future. It took two hours.

DSLRKIT 2.5" SSD to 3.5" SATA Hard Disk Drive HDD Adapter Caddy Tray CAGE Hot Swap Plug (Pack of 2). I like that these are metal, which I think will be better for conducting heat away into the metal chassis they sit in. Open flow-through. I did not have any problem with unfinished edges which were otherwise smooth. These are OEM quality. I would buy again.

This set of adapters was perfect for my needs. Very high quality, well-machined, all screws and parts included and it all fit perfectly. I used these to secure a pair of expensive 2.5" SATA SSDs in a two-bay NAS that only accepted 3.5" HDDs. I needed these because the NAS didn't use cables to connect to the drives, it used a backplane whose sockets had to align exactly with 3.5" SATA form factor hard drives. This was the only pair of adapters that secured the 2.5" SSDs to the side of the bracket so its contacts aligned perfectly with the backplane. The only downside I can think of is the higher price, but that's up to you.

Son bastante bien fabricadas para encajar los Discos Solidos y conexión al Computador. Muy bien Empacadas y la entrega Internacional, impecable. Gracias a los fabricantes y a Amazon.