ProfilePHNT12CC Clearview Air Conditioner 12,000, Inverter Technology, Ultra Quiet, Medium Rooms up to 550 Sq. FT, Full Window View with Easy Installation, Energy-Efficient Cooling, 12200 BTU, White

Received and installed:Installation took about an hour and a half but I did it alone. Being very careful when carrying it etc. Manufacturer recommends 2 hours of letting it sit after installation in order for the compressor oil settle, although most people online say 8-24 hours.You’ll definitely need a level, screwdriver, knife to cut foam or large scissors, measuring tape.The pros so far:I have a window still! I can look outside without it blocking the view.Installation wasn’t bad just take your time with the measurements of the window sizing and cutting foam pieces.It cools very quickly and it has a beast of a fan.Cons so far:There is a small issue with vibration, that being said I think if you apply some rubber stick on pads to the exterior mounting screws it’ll remove a lot of that extra vibration. The vibration only occurs when the compressor kicks on, then as it slows down it vibrates less. The fan inside is very quiet on lower speeds. There is a water pump that pumps the condensation outside. The few times it kicks in is pretty loud, so if you’re extremely sensitive to noises this unit might not be for you. But compared to regular box window AC units this is definitely quieter overall.— Overall:It seems well built and the components feel of good quality, will have to report back as time goes on as far as longevity and quality.When I have to take it out for storage during winter it says to empty the water so that it doesn’t freeze. The foam pieces do come off easily for storage and re-use but you have to cut them accordingly. Clean the filter screens regularly, this unit has two filters front and back. I would also empty the water from the front when cleaning filters to avoid stagnating water and potentially mold.FYI: If you end up having to move the unit to another window you’ll have to order a $50 kit from GE with the foam so that you can cut to size again.I’m happy with the purchase because the biggest thing for me is how well it cools and that the window remains visible.

I bought this item at the beginning of May 2025 in an attempt to get it before tariffs went into effect even though it wasn't hot and I didn't need it yet. It's also smarter to set an AC up when it's cooler so you're more comfortable. It took 45 mins or so to properly install. I let it sit over night and settle before letting it run for 30 mins the next day to ensure everything works properly. The unit wasn't ice cold for its size but seemed to be functional.Later that night when laying on the couch I could see a flashing light HIDDEN behind the front filter nowhere near the normal LED display. There was no mentioning of the light or it's purpose noted anywhere inside the manual even under the troubleshooting problems section. Ihad to Google it. Apparently the flashing light could mean low refrigerant, faulty inverter or power board or a bad compressor. It was suggested to unplug the unit for 30 mins and see if it resets any bugs. Waiting 30 mins did not reset any bugs. I also checked all filters and checked to see if there was any water to drain. Everything was perfect and brand new. I'm not taking a chance with 4 days left to return this that it's a hiccup and not something serious. GE should have all the warnings listed in the manual with easy to read explanations of what each specific light means. A warning light should not be used to indicate mutiple potential and serious errors. Warning lights should also be clearly visible on the MAIN DISPLAY. I'm returning it for my money back. This unit is too expensive to risk being a compressor or low refrigerant after 30 mins of use.As for how the unit worked for the 30 mins it was on. It was the most quiet AC I have ever had especially for this size. Cooling was not the best considering it didn't get really hot and I couldn't really test it on a hot day. Setup was a pain because I'm in an apartment unit and had to access the outside supports blindly since I couldn't access them from outside the building standing on solid ground. In terms of a clear view. Yes I could access the window, but the unit sticks out over a foot and still obstructs any view not looking straight out. I expected the U to be deeper and hand lower on each side of the window.

Great AC and fan for fresh air circulation. I would recommend making sure you put the window padding and foam between the AC-inside wall BEFORE putting the unit in. It may seem obvious, but it took us 2 tries to get the padding snug enough to ensure the AC was quiet and efficient. Overall, fairly easy to install but it is heavy so be intentional about how you move it around. Best with 2 people. We also set it up in an East-facing window to push in cooler air and give the AC shade from the hot afternoon sun. Lots of light still comes into my room and it takes up minimal space. So far, I really love this thing and it makes a huge difference in creating a comfortable cool space. I’ll most likely use the fan year-round to keep things fresh.